Bissoy.com
Doctors Medicines MCQs Q&A

Maximum pressure in pipelines is reduced by _________

Maximum pressure in pipelines is reduced by _________ Correct Answer friction and branching of the pipe

Analysis of a particular hammer phenomenon in the pipelines will aid in determining the maximum pressure. This maximum pressure can reduce because of frictional losses and due to branching in the pipe.

Related Questions

A university library budget committee must reduce exactly five of eight areas of expenditure - I, J, K. L, M, N, O and P - in accordance with the following conditions: If both I and O are reduced, P is also reduced. If L is reduced, neither N nor O is reduced. If M is reduced, J is not reduced. Of the three areas J, K and N exactly two are reduced. If both K and N are reduced, which one of the following is a pair of areas neither of which could be reduced?
A university library budget committee must reduce exactly five of eight areas of expenditure—I, J, K, L, M, N, O and P—in accordance with the following conditions: If both I and O are reduced, P is also reduced.
If L is reduced, neither N nor O is reduced.
If M is reduced, J is not reduced.
Of the three areas J, K, and N exactly two are reduced. Question : If both K and N are reduced, which one of the following is a pair of areas neither of which could be reduced?
Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water coloumn in case of mercury-water, differential manometer is equal to (where, H = difference in height of mercury column in mm).
The Average weight of the family consists of four members i.e. Mother, Father, Daughter, and Son. By dieting family reduces weight and the Average weight of the family reduced by 6 Kg, Mother and Father reduced 2 kg each, and Daughter and Son reduced weight in ratio 3 : 2 How much Kg Daughter reduced weight?
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. below would be __________ pressure
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. below would be __________ pressure
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.