Bissoy.com
Doctors Medicines MCQs Q&A

Thrust can be varied by changing the throat area along with throttling the flow.

Thrust can be varied by changing the throat area along with throttling the flow. Correct Answer True

Some methods of changing the area involves using a tapered plug or movable contoured pintle into the nozzle. Pintle has a pin or bolt shaped structure with a rod inside the nozzle and a tip outside of it.

Related Questions

Consider the following statements in connection with thrust bearings: 1) Cylindrical thrust bearings have higher coefficient of friction than ball thrust bearings. 2) Taper rollers cannot be employed for thrust bearings. 3) Double-row thrust ball bearing is not possible 4) Lower race, outer race and retainer are readily separable in thrust bearings. Which of the above statements are correct?
Rocket A has twice the pressure thrust of rocket B while it has half the momentum thrust as that of B. If the momentum thrust of B is 5 times its pressure thrust, find the ratio of total thrust of A to B.
Determine the chamber pressure for a rocket engine if the thrust coefficient is 1.8, the throat area is 0.2 m2 and the total thrust is 20000 N.
Determine the nozzle throat area for a rocket engine producing a total thrust of 10 kN, chamber pressure of 5.2 MPa and thrust coefficient of 1.9.
If D is the depth of water upstream of the throat above its sill, B is the width of the throat, to achieve critical flow in an open venturi flume, the theoretical maximum flow Q, is
A rocket has a throat area of 10 mm2 and nozzle exit area of 25 mm2. If the mass flow rate of its propellants is 2 kg/s, exit velocity is 30 m/s, and if exit pressure is twice the standard atmospheric pressure at sea level, what will be the total thrust?
A rider is riding his bike along the sides of a square ground. He drives the bike with the speed of 10 km/h along one side, 15 km/h along another side, 18 km/h along the third side, and 20 km/h along the last side and reaches the starting point. What is the average speed of the bike along the sides of the ground?
How is diffuser throat area At2 related to the nozzle throat area At1?
Why is the diffuser throat area greater than the nozzle throat area?
Determine the rocket thrust coefficient for a total thrust of 20 kN, chamber pressure of 500 kPa and a throat diameter of 10 cm.