Bissoy.com
Doctors Medicines MCQs Q&A

If for a bell-shaped nozzle, the divergence angle immediately after the throat is 40°, contour angle at the inflection point is 32° and the nozzle full-angle at its exit is 10°, determine the turn-back angle.

If for a bell-shaped nozzle, the divergence angle immediately after the throat is 40°, contour angle at the inflection point is 32° and the nozzle full-angle at its exit is 10°, determine the turn-back angle. Correct Answer 27°

Divergence angle is the difference between the angle at the inflection point and the angle at the nozzle exit. θi = contour angle at the inflection point = 32° θe = 1/2 x full-angle at the exit = 5° θturn-back = θi – θe = 32° – 5° = 27°.

Related Questions

How far is point 'R' from Point 'T'? Statement (I): Point 'R' is 5 metres to the north of point 'M'. Point 'U' is 4 metres to the east of point 'R'. Point 'T' is to the west of point 'R' such that points 'U' 'R' and 'T' form a straight line of  metres. Statement (II): Point 'Z' is metres to the south of point 'T'. Point 'U' is  metres to the east of point 'T'. Point 'M' is  metres to the east of point 'Z'. Point 'R' is  metres to the north of point 'M'. Point 'R' lies on the line formed by joining points 'T' and 'U'.
Point A is 3m in the north of point B. Point D is 2m in the east of point E. Point F is 9m in the west of point G. Point C is 4m in the west of point B. Point C is 3m in the south of point D. Point F is 5m in the south of point E. Point H is 5m in the north of point G. What is the shortest distance between point H and point A?
For a conical nozzle of throat diameter 0.007 m, exit cross-section diameter 0.02 m, and divergent section length of 0.038 m, determine the nozzle semi-divergence angle.
If the semi-divergence angle of a conical nozzle is 15°, throat diameter is 8.326 cm and exit area is 0.54 m2, determine the nozzle length.
Considered the following statements about the characteristics of contours - (1) Closed contour lines with higher values inside show a lake, (2) Contour is an imaginary line joining points of equal elevations, (3) Closely spaced contour lines indicate a steep slope. (4) Contour lines of equal height may not converge nor continue as one line but a single contour line may split into two lines Which of the statements given above are correct?
Point P is 4m in the west of point V. Point R is 6m in the north of point Q. Point T is 5m in the south of point S. Point V is in the middle of point R and Q. Point U is 5m in the east of point R. Point V is in north of point Q. Point S is 5m in the east of point V. What is the area of triangle formed by point P, R and Q?
If the divergence angle for a conical nozzle is 30°, nozzle exit diameter is 30 cm, exit pressure is 10% more than the ambient pressure, mass flow rate is 14 kg/s and the jet exhaust velocity is 700 m/s, determine the total thrust of the engine under standard sea level operating conditions.
Garima starts walking towards the south from point R. He walks for 5m to reach Point S then turns right and walks for 2m to reach point T from there he turns left and walks for 3m to reach Point Z. He then turns right from point Z and walks for 6m to reach point Y and then turns right and walks for 3m to reach point X. He then turns right from point X and walks for 4m to reach point W and then turns left and walks for 5m to reach point V and then turns left and walks for 4m till point U and stops. What is the shortest distance between point V and point R?
A rocket has a throat area of 10 mm2 and nozzle exit area of 25 mm2. If the mass flow rate of its propellants is 2 kg/s, exit velocity is 30 m/s, and if exit pressure is twice the standard atmospheric pressure at sea level, what will be the total thrust?
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. How far and in which direction is Point G from Point A?