Bissoy.com
Doctors Medicines MCQs Q&A

The ductility of true strain values _____________ with increase in second phase particles.

The ductility of true strain values _____________ with increase in second phase particles. Correct Answer decrease

The presence of a second phase particle increases the strength of material, but they provide a site for void formation, which leads to ductile failure earlier than the pure metal.

Related Questions

From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Consider the following statements regarding ductility of bitumen: 1. Ductility is the property which does not permit bitumen to undergo large deformation without breaking. 2. Bitumen with high ductility are generally adhesive but do not have good cementing properties 3. Ductility must be ascertained at two different temperatures in order to pronounce on the suitability of the material Which of the above statements are correct?
The true strain rate is given as ϒ, and conventional strain rate is given as ε. The engineering strain is equal to e. The relationship between conventional strain rate and true strain rate is _______
To maintain the constant true strain rate of a sample, the crosshead velocity should increase with the increase in the length of the specimen. What will be the optimum velocity with the change in length to keep the true strain rate constant? (True strain rate=ϒ, L=length of sample, t=time).
The Coffin-Manson relation is described as ________________ where Δεp = the plastic strain amplitude ε’f = fatigue ductility coefficient 2N = number of strain reversal to failure c = fatigue ductility exponent
Which of the following statements is/are correct with respect to a Scott-connected transformer? I. It can do 3-phase to 2-phase conversion II. It can do 2-phase to 3-phase conversion III. It can do 2-phase to 4-phase conversion IV. It can do 3-phase to 4-phase conversion
Match the following in Column X with Column Y: Column X Column Y  P. In a triaxial compression test, with increase of axial strain in loose sand under drained shear condition, the volumetric strain  I. decreases  Q. In a triaxial compression test, with increase of axial strain in loose sand under undrained shear condition, the excess pore water pressure  II. Increase  R. In a triaxial compression test, the pore pressure parameter “B” for a saturated soil  III. remains same  S. For shallow strip footing in pure saturated clay, Terzaghi’s bearing capacity factor (Nq) due to surcharge  IV. is always 0.0.      V. is always 1.0.      VI. is always 0.5. Which one of the following combinations is correct?
The critical reasoning question is based on a short argument, a set of statements, or a plan of action. For each question, select the best answer of the choices given. The size of particles is directly linked to their potential for causing health problems. Small particles less than 10 micrometers in diameter cause the greatest problems, as they can get deep into the lungs and some may get into the bloodstream. One being exposed to such particles can affect both the lungs and the heart of a person. But there are particles that are causing environmental effects too, few of which are given below.  Which among the following below options does not talk about the effects of these particles on the environment?
Consider the following statements: a. Beta particles are negatively charged and are more penetrating than Alpha particles, which are positively charged. b. Gamma particles are neutral and are more penetrating than Beta-particles. c. In general neutral particles can be said to be having very high penetrating power.
The presence of second phase particle reduces the ductility of the material. The type of particle which has the least effect in lowering the ductility is __________