Bissoy.com
Doctors Medicines MCQs Q&A

Which process is used to refine an impure compound by dissolving it in a suitable acid or alkaline medium?

Which process is used to refine an impure compound by dissolving it in a suitable acid or alkaline medium? Correct Answer Selective dissolution

Selective dissolution is a process in which an impure compound is dissolved in a suitable solvent metal. Parke’s process is an example of one such process which uses selective dissolution. In this process, different chemical reagents are used to selectively extract metal components from ore.

Related Questions

In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
A shopkeeper has 12 kg of pure rice and 6 kg of impure rice. He mixes both type of rice but 3 kg of the mixture gets spoiled. If he again mixes 3 kg of impure rice to the remaining mixture and sell mixture at a price 20% above the cost price of pure rice. Then what is actual profit or loss percentage if cost of impure rice is 50% of cost of pure rice.
There are two medium L1 and L2 of refractive index n1 and n2 respectively (n2  > n1 > 1). In which of the following condition the total internal reflection may occur: a) When the light travel from medium L1 to medium L2. b) When the light travels from medium L2 to medium L1. c) When the light travel from medium L1 to air. d) When the light travels from air to medium L2. Which of the following statement is correct?
Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid
A laboratory teacher had 1.5 litres of concentrated sulfuric acid. She replaces concentrated sulfuric acid with water after every class till the carton is empty. One student needs 10 ml of sulfuric acid mixture in every class. First class had 20 students and since then all other classes observed 10 students. Calculate total quantity of water with which mixture of sulfuric acid and water is replaced till carton is empty. Note 1.5 litres of concentrated sulfuric acid had 90% sulfuric acid and rest water
Solution-1 containing 10% nitric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% nitric acid and 10% acetic acid at the rate D, the product formed contains 30% nitric acid and 20% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
A sample of polystyrene is warmed under reflux in concentrated nitric acid and the clear mixture is poured in water to yield a X coloured precipitate. This precipitate is then extracted with ether and then with NaOH solution followed by washing with water in each extraction. The nitro compounds from the combined final aqueous extract and alkaline extract using concentrated HCl and zinc. The final solution after being diazotized and then cooled is poured into excess of alkaline naphthol to give Y coloured solution. What are the colours X and Y?
What is the use of biochar in farming? 1. Biochar can be used as a part of the growing medium in vertical farming. 2. When biochar is a part of the growing medium, it promotes the growth of nitrogen-fixing microorganisms. 3. When biochar is a part of the growing medium, it enables the growing medium to retain water for longer time. Which of the statements given above is/are correct?
Large, medium and small ships are used to bring water. 4 large ships carry as much water as 7 small ships, 3 medium ships carry the same amount of water as 2 large ships and 1 small ship. 15 large, 7 medium and 14 small ships, each made 36 journeys and brought a certain quantity of water. In how many journeys would 12 large, 14 medium and 21 small ships bring the same quantity ?