Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following statements are incorrect about Baffles in a Shell and Tube HE?

Which of the following statements are incorrect about Baffles in a Shell and Tube HE? Correct Answer Baffles streamline the motion of the fluid in Shell side and hence decreases the turbulence

One of the important tasks of a baffle is to increase the turbulence on the shell side so that forced convective effect successfully plays its role and increase the overall heat transfer coefficient. It also holds the tubes in their position as well to provide them with mechanical support.

Related Questions

Baffles are provided in a shell and tube heat exchanger to increase the turbulence and velocity of the shell side fluid. Which of the following shaped baffles does not fall in the category of transverse baffle?
The centre to centre distance between two consecutive baffles in a shell and tube heat exchanger is called the baffle pitch or baffle spacing, which is more than $${\frac{1}{5}^{{\text{th}}}}$$ the I.D. of the shell. Which of the following is not a function of the baffles?
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
Baffles in the shell side of a shell and tube heat exchanger
In a shell and tube heat exchanger, baffles are provided on the shell side to
Baffles provided on the shell side of a shell and tube heat exchanger are meant for
In a multipass shell and tube heat exchanger, the baffles on shell side is primarily provided for
In a shell and tube heat exchanger, the height of 25 percent cut baffles is equal to (where, D = inside diameter of shell)
Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient for the cooling water, whether on shell side or tube side is the same. The best arrangement is
One test tube contains some chemical and another test tube contains an equal quantity of water. To prepare a solution, 20 g of the chemical is poured into the second test tube. Then, two-thirds of the formed solution is poured from the second test tube into the first. If the fluid in the first test tube is four times that in second, what quantity of water was taken initially.