Bissoy.com
Doctors Medicines MCQs Q&A

A saturated chlorine solution in water, with addition of acid or base, has a pH of or 1.54, an actual chlorine concentration, Cy, of 0.062 M, a hydrochloric acid concentration of 0.029 M, and HOCl concentration of 0.029.

A saturated chlorine solution in water, with addition of acid or base, has a pH of or 1.54, an actual chlorine concentration, Cy, of 0.062 M, a hydrochloric acid concentration of 0.029 M, and HOCl concentration of 0.029. Correct Answer False

Therefore, a saturated Cl solution in water, without addition of acid or base, has a pH of 1.54, an actual Cl concentration, Cy, of 0.062 M, a HCl concentration of 0.029 M, and a HOCl concentration of 0.029.

Related Questions

Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Reaction between which of the following will NOT lead to the evolution of Hydrogen gas? (A) Magnesium with dilute hydrochloric acid (B) Copper with dilute hydrochloric acid (C) Sulphur powder with dilute hydrochloric acid (D) Aluminium with dilute hydrochloric acid
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y. 
A compound dissolves in water at a rate proportional to the product of the amount of undissolved solid and the difference between the concentration in a saturated solution and the actual solution; i.e., Csat – C(t). A saturated solution of this compound contains 40 g per 100 g of water. In a test run starting with 20 kg of undissolved compound in 100 kg of water, it was found that 5 kg dissolved in 3 hr. if the test continues, how many kg of compound will remain undissolved after 7 hr? Assume that the system is isothermal.
Mr.Rohan while helping the students of Class IV in adding and subtracting fractions observed that several students are not able to complete the addition of two improper fractions. He gave a small test with questions from the addition of proper fractions (one item of addition of two similar fractions, three items from the addition of proper and improper fractions, and four items from the addition of improper fractions). He analyzed the responses of each student and found that nearly 45% of students were not clear in adding proper with improper fractions which were affecting their performance in adding two improper fractions. He, therefore, focused on developing the understanding of improper fractions and their addition with proper fractions after which he proceeded to teach the addition of two improper fractions. Which kind of assessment is depicted by this situation?
An aqueous solution with chlorine 30 g/L and an organic compound with no chlorine at the rate 50 L/min were put into an extraction machine and produced aqueous solution with chlorine 5 g/L and organic compound with chlorine 10 g/L, what is the rate of aqueous solution?
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
In a 60 litre solution of acid and water, the ratio of acid and water is 3 : 7. How much (in litre) acid is to be mixed in the solution so that the ratio of acid and water in the ration of acid and water in the resulting solution is 1 : 2?
A 60% spirit solution is mixed with r% spirit solution in the ratio 1 : 3 such that a s% spirit solution is obtained. When a (s/3)% spirit solution is mixed with 55% spirit solution in equal ratio, an (r/2)% spirit solution is obtained. Which of the following can be determined? (A) Value of ‘r’ (B) Value of ‘s’ (C) Volume of the 60% spirit solution mixed initially (D) If 9 liters of r% spirit solution was mixed initially, what was the volume of the s% spirit solution thus obtained?
Given below are three quantities named A, B and C. Based on the given information, determine the relation among the three quantities. Quantity A∶  A 30 litre mixture of wine and water has wine and water in the ratio 5∶ 7. How much water must be drawn off so that the ratio of wine and water becomes 25∶ 19? Quantity B∶ A 35 litre mixture of wine and water has wine and water in the ratio 1∶ 3. How much water must be drawn off so that the ratio of wine and water becomes 1.75∶ 3.35? Quantity C∶ A 27 litre mixture of wine and water has wine and water in the ratio 3∶ 2. How much water must be drawn off so that the ratio of wine and water becomes 81∶ 11?