Bissoy.com
Doctors Medicines MCQs Q&A

Which catalyst is used in the reaction of acetylene and chlorine producing tetra chloro ethane?

Which catalyst is used in the reaction of acetylene and chlorine producing tetra chloro ethane? Correct Answer Ferric chloride

Ferric chloride is used as catalyst in the reaction of acetylene and chlorine to give tetra chloro ethane whereas barium chloride is used as catalyst in the reaction to produce tri chloro ethylene from tetra chloro ethane.

Related Questions

Which of the following statement about ethane is correct? The IUPAC name of ethane is also ethane. It contains 6 hydrogen atoms to form a bond.
An aqueous solution with chlorine 30 g/L and an organic compound with no chlorine at the rate 50 L/min were put into an extraction machine and produced aqueous solution with chlorine 5 g/L and organic compound with chlorine 10 g/L, what is the rate of aqueous solution?
Look at the chlorine residual data during chlorination of wastewater which consists of ammonia, organic matter, and microorganisms. Chlorine dosage (mg/L) 0.1 0.5 1.0 1.5 2.0 2.5 Chlorine residual (mg/L) 0.0 0.4 0.8 0.4 0.9 1.4 Calculate chlorine dose at the breakthrough point
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
Calculate the heat of combustion of ethane, in the reaction C2H6(g) + 3 1/2O2(g) → 2CO2(g) + 3H2O(l) where the heats of formation of ethane gas, carbon dioxide gas and water liquid are –84.7 kJ mol-1, -393.5 kJ mol-1 and –285.8 kJ mol-1 respectively.
Polymerisation product of C₂F₄ (carbon tetraflouride) is called P.T.F.E. (poly chloro tetra flouro ethylene). It is also called
Polymerisation product of C2F4 (carbon tetraflouride) is called P.T.F.E. (poly chloro tetra flouro ethylene). It is also called
For the reaction, A = X + Y, the respective concentrations are CA, CX and CY. The forward reaction rate constant is kf and the backward reaction rate constant is kb. Choose the correct statement from the following:
P. At equilibrium, kf CA > kB CxCy
Q. If the reaction is irreversible than, kb CXCY = 0
R. The backward reaction rate will essentially be first order, if the forward reaction rate is first order.
S. Activation energy for the first order forward reaction will be independent of temperature.
Name : Formula 1) 1, 2 – Dichloro ethane: CH2Cl – CH2Cl 2) 1,5-Dibromo-3-methylpentane: CH2Br – CH2 – CH (CH3) – CH2 – CH2Br 3) 2,3-Dihydroxysuccinic acid dehydrate:  COOH – CH (OH) – CH (OH) – COOH 4) 2 - Chloro - 3 - methylpentane: CH3 – CH2 – CH(CH3) C(Cl) = CH3 Which of the above pairs are correctly matched?
In a swimming pool, water and chlorine is mixed in which chlorine is 15% and water is 170 litres, what quantity of chlorine should be added in the swimming pool to make it 32% of the total weight of the swimming pool?