Bissoy.com
Doctors Medicines MCQs Q&A

The load carrying capacity of bearing is expressed as the _______

The load carrying capacity of bearing is expressed as the _______ Correct Answer performance factor

The performance factor is used to express the load carrying capacity of the bearings. The load carrying capacity of porous-metal bearings is usually measured based on the friction/wear criterion, which signifies the heat generated by the bearing.

Related Questions

Consider the following two statements regarding Bearing stiffeners provided at the location of a concentrated load: 1. Bearing stiffeners have to resist bearing and buckling loads. 2. Bearing area and the area resisting buckling load are the same. Which of the above statements is/are correct ?
Consider the following statement: 1. Initial load tests and routine load tests are carried out on test piles and working Piles, respectively. 2. In a pile load test, the allowable load can be taken equal to half the ultimate load at which the total settlement amounts to one-tenth of the pile diameter. 3. In a pile load test, the allowable load can be taken equal to two-thirds of the total toad which causes a plastic settlement of 6 mm. Which of the above statements are correct?
The dynamic load carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions.
Which of the following are the functions of lubrication in a bearing unit ? 1. To protect the bearing components from corrosion. 2. To absorb heat from the bearing unit. 3. To carry heat away from the bearing unit. Select the correct answer using the code given below
A rotor which is balanced statically but not dynamically is supported on two bearings L apart and at high speed of the rotor, reaction on the left bearing is R. The right side of the bearing is shifted to a new position 2L apart from the left bearing. At the same rotor speed, dynamic reaction on the left bearing in the new arrangement will
Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing.
Heat capacity function for a liquid is given as Heat capacity = 311.4 + 0.128 T, where temperature (T) is expressed in ˚C. What is the relation of temperature with heat capacity if the temperature is expressed in terms of ˚R?
As per IS 800 ∶ 2007, in the design of beams/plate girders, when the web of a member acting alone is inadequate, different types of stiffeners are provided. Match the type of stiffeners provided in List I with the requirement to be satisfied by them in List 2. (Use the Code in the lists for matching). List 1 List 2 B. Intermediate transverse web stiffener 1. Provide local reinforcement to web under shear and bearing. C. Load carrying stiffener 2. Improve the buckling strength of a slender web due to shear. D. Bearing stiffener 3. Prevent local buckling of web due to concentrated loading. E. Diagonal stiffener 4. Prevent local crushing of web due to concentrated loading
The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.