Bissoy.com
Doctors Medicines MCQs Q&A

If a process actual fallout is 1350 ppm, and its Cp=2.0, what will be its fallout after centering?

If a process actual fallout is 1350 ppm, and its Cp=2.0, what will be its fallout after centering? Correct Answer 0.0018 ppm

Process fallout is 1350, so its Cpk=1.0. So after potential improvement, when its Cpk = Cp, we get the process fallout = 0.0018 ppm.

Related Questions

The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is a degasser in this system. Calculate the amount of SBA resin required for the following data. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 Silica: 30 ppm as CaCO3 CO2: 45 ppm as CaCO3 EMA: 100 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 35 m3/hr Operation hours: 10 hrs
The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is no degasser in this system. Calculate the amount of resin required for the following information. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 Silica: 45 ppm as CaCO3 CO2: 45 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 35 m3/hr Operation hours: 10 hrs
Following is an ecosystem of water-body, showing the concentration of DDT in each trophic levels. Water →  Algae → Fish → Pelican bird 1700 ppm → 500-600 ppm → 77 ppm → 0.2 ppm Which of the following feature is incorrect if the above is to represent biomagnification?
If Cpk=1.0 and Cp=2.0, what will be the actual fallout for the process in ppm?
The process fallout (in ppm) ___________ with increase in the process capability ratio Cp, for a normally distributed process.
A process capability ratio Cp=____________ indicates the fallout rate of 1 ppm for one-sided specifications for a normally distributed process.
The treatment system consists of a WAC, SAC which is followed by a WBA and SBA. Calculate the amount of WBA resin required for the following data. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 EMA: 25 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 135 m3/hr Operation hours: 20 hrs
Calculate the SAC resin required for the following data. It should be noted that prior to the SAC, a WAC system is present. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 EMA: 50 ppm as CaCO3 Capacity: 57 Kg/m3 Correction factor: 0.9 Flow rate: 135 m3/hr Operation hours: 20 hrs
What is the value of process fallout in defectives ppm for one sided specifications of a PCR Cp= 1.10?
Pavan and Sravan are two persons. If Pavan works with his actual efficiency and Sravan twice of his actual efficiency then it takes 25 days to complete the work. But If Pavan works twice of his actual efficiency and Sravan with his normal efficiency then the work is completed in 20 days. How many days would it take if Sravan alone works with his actual efficiency (in Days)?