What is the difference between Boot-strap air cooling system and Boot-strap evaporative cooling system?

What is the main difference between simple air cooling system and simple air evaporative cooling system?

A

Simple air evaporative cooling system has an evaporator

B

Simple air evaporative cooling system has two evaporators

C

Simple air evaporative cooling system has an extra compressor

D

Simple air evaporative cooling system has three evaporators

Consider the following statements for cooling towers: 1. Cooling tower is an artificial device used to cool the hot cooling water coming out of condenser more effectively. 2. The amount of water usually lost with induced draft cooling tower ranges from 5% to 6% by evaporation. 3. The amount of water usually lost with induced draft cooling tower ranges from 7% to 8% by drift losses. 4. The rate of evaporation of water and its cooling effect on the remaining water depends upon the relative humidity of air passing through the tower. Which of the above statements are correct?

A

1 and 4 only

B

1 and 3 only

C

2 and 3 only

D

1, 2, 3 and 4

In a bootstrap air evaporative cooling system, the evaporator is provided

A

Between the combustion chamber and the first heat exchanger

B

Between the first heat exchanger and the secondary compressor

C

Between the secondary compressor and the second heat exchanger

D

Between the second heat exchanger and the cooling turbine

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil, and td₃ = Dry bulb temperature of the cooling coil)

A

(td₁ -td₃)/( td₂ -td₃)

B

(td₂ -td₃)/( td₁ -td₃)

C

(td₃ -td₁)/( td₂ -td₃)

D

(td₃ -td₂)/( td₁ -td₃)

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil and td₃ = Dry bulb temperature of the cooling coil)

A

$$\frac{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

B

$$\frac{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}$$

C

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

D

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}$$

Consider the following statements for the appropriate context: 1. The Relative Humidity of air remains constant during sensible heating or cooling 2. The Dew Point Temperature of air remains constant during sensible heating or cooling 3. The total enthalpy of air remains constant during adiabatic cooling 4. It is necessary to cool the air below its Dew Point Temperature for dehumidifying Which of the above statements are correct?

A

1, 2 and 3

B

1, 2 and 4

C

3 and 4 only

D

2, 3 and 4

Mass of air per tonne of refrigeration will be _____ in Boot-strap air cooling system than Boot-strap evaporative system.

A

less

B

more

C

equal to

D

can’t say

Minimum temperature upto which water can be theoretically cooled down in the cooling tower by evaporative cooling is equal to the __________ temperature of air.

A

Wet bulb

B

Dry bulb

C

Saturation

D

Dew point

The cooling tower uses the phenomenon of evaporative cooling to cool warm water above the dbt of air.

A

true

B

false

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil, and hA = Enthalpy of air at the end of dehumidification process)

A

(hA - h2)/ (h1 - h2)

B

(h2 - hA)/ (h1 - h2)

C

(h1 - h2)/ (hA - h2)

D

(hA - h1)/ (h2 - h1)

What is the difference between Boot-strap air cooling system and Boot-strap evaporative cooling system?

Related Questions