Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following processes is mainly used for making the connecting rods?

Which of the following processes is mainly used for making the connecting rods? Correct Answer Forging

Connecting rods are generally manufactured by the forging operation. In forging, a hammer is used which strikes on the heated metallic part to get into the desired shape. The properties like strength, toughness, etc are greatly enhanced by performing the forging operation. Forging can be open die forging or closed die forging.

Related Questions

The base of a right pyramid is a square of side 10 cm. 4 rods with maximum possible length have been kept in the pyramid. The volume of the pyramid (without keeping the rods inside) is 400 cm3. The radius of the base of all the rods is 0.7 cm. What will be the approximate volume of the remaining part of the pyramid (when rods are kept inside the pyramid)?
Piston diameter = 0.24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m Find angular acceleration of connecting rod in rad/s2.
Three rods, one made of silver (l = 420W/m K), second made of aluminum (k = 210W/m K) and the third made of iron (k = 70W/m K) are coated with a uniform layer of wax all around. The rods are placed vertically in a boiling water bath with 250 mm length of each rod projecting outside. If all the rods are having following dimensions i.e. diameter = 15 mm and length = 300 mm and have identical surface coefficient 12.5W/ m2 K, work out the ratio of lengths up to which wax will melt on each rod
Read the given statements and conclusions carefully. Assuming that the information given in the statement is true, even if it appears to be at variance with commonly known facts, decide which of the given conclusions logically follow(s) from the statements. Statements: No boat is ship. Some ships are rods. Conclusions: I. No boat is rod. II. Some rods are ships. III. Some rods are not boats.
Statements : All rods are bricks. Some bricks are ropes. All ropes are doors.

Conclusions :
I. Some rods are doors.
II. Some doors are bricks.
III. Some rods are not doors.
IV. All doors are ropes.
For a steam engine, the following data is given: Piston diameter = 0.24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m ; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m calculate inertia force at θ=30 degrees from IDC.
Piston diameter = 0.24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m Find the equivalent length L of a simple pendulum swung about an axis.
From the data given: Piston diameter = 0.24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m ; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m Find the correcting couple in N-m?
Coupling rods with connecting rods and pins can be treated as ________
From the following data calculate the radius of gyration of the connecting rod. mass of connecting rod = 1.5 Kg, length of wires = 1.25m, distance of wires to the rods = 0.12m Time for 20 oscillations = 40 secs.