Bissoy.com
Doctors Medicines MCQs Q&A

Heat loss through the sides of the crucible furnace does not affect the efficiency of the furnace.

Heat loss through the sides of the crucible furnace does not affect the efficiency of the furnace. Correct Answer False

Reduction in heat loss through the sides of the crucible furnace can increase the efficiency of the furnace. It is generally estimated that the technology used like pre-fired radiant panels can improve the efficiency of crucible furnace by 30 % and also improves the melting rates of material used in the furnace.

Related Questions

Crucible furnaces are economical for melting metal, but heat loss is the major problem in the crucible furnaces.
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow, and k = Thermal conductivity of the body)
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow and k = Thermal conductivity of the body)
Square crucible furnaces are more efficient than the round crucible furnaces.
Consider the following statements for an induction furnace: 1. High-frequency current is generally used for the furnace working. 2. There is less loss of alloying elements due to oxidation. 3. Pronounced stirring action of molten metal occurs inside the furnace. 4. Slag cover is essential for the efficient working of the furnace. Which of the above statements are correct?
A cylindrical stainless steel (k = 25 W/m K) ingot, 10 cm in diameter and 25 cm long, passes through a heat treatment furnace which is 5 meter in length. The initial ingot temperature is 90 degree Celsius, the furnace gas is at 1260 degree Celsius and the combined radiant and convective surface coefficient is 100 W/m2 K. Determine the maximum speed with which the ingot moves through the furnace if it must attain 830 degree Celsius temperature. Take thermal diffusivity as 0.45 * 10 -5 m2/s
A Carnot heat engine receives heat at 750 K and rejects the waste heat to the environment at 300 K. The net work output of the heat engine is used to drive a Carnot refrigerator, whose COP is 6.14. If the heat removal rate from the refrigerated space is 6.6 kW, determine the rate of heat supply to the heat engine?
Crucible furnace is a type of stationary furnace used for melting and holding the molten metal.
Heat is transferred to a heat engine from a furnace at a rate of 80 MW. If the rate of waste heat rejection to a nearby river is 50 MW, determine the thermal efficiency for this heat engine.
One cubic meter of some alloy is heated in a crucible from room temperature to 100 degree Celsius above its melting point for casting. The alloy density = 7.5 g/cm3, melting point = 800 0C, specific heat = 0.33 J/gC in the solid state and 0.29 J/gC in liquid state and heat of fusion = 160 J/g. How much heat energy must be added to accomplish the heating, assuming no losses? Ambient temp = 25 °C. Density of solid and liquid are same.