Bissoy.com
Doctors Medicines MCQs Q&A

In the mechanized foundry, a roller conveyor is used for the transportation of moulds, on which moulds are transferred by rolling.

In the mechanized foundry, a roller conveyor is used for the transportation of moulds, on which moulds are transferred by rolling. Correct Answer False

The transportation of the moulds should be controlled. A mould cannot be placed on a roller conveyor and allowed to roll until it is stopped by any obstruction. For transportation, moulds are either conveyed on trains or remained in permanent flasks or pushed mechanically along a roller conveyor.

Related Questions

An attempt is made to pull a roller of weight W over a curb (step) by applying a horizontal force F as shown in the figure. The coefficient of static friction between the roller and the ground (including the edge of the step) is μ. Identify the correct free body diagram (FBD) of the roller when the roller is just about to climb over the step.
If a mother is a non tongue roller and Father is a tongue roller, whose father was a non- roller, what is the probability of having a roller daughter?
In mechanized foundry, rubber conveyor cannot be used for long time during production of castings.
Operating cost involved in the mechanized foundry is more than the cost of any other simple foundry for large production of castings.
In the following question, one statement is given, followed by two conclusions I and II. You have to consider the statements to be true, even if they seem to be at variance from commonly known facts. You have to decide which of the given conclusions, if any follow from the given statement. Statement: People generally prefer driving their own vehicles over public transportation to go for work which leads to increase in pollution. People should use public transportation or atleast use carpooling if they care to bring down pollution levels.  Conclusion I: Using Public transportation or carpooling will bring down the rising pollution levels.  Conclusion II: People who use personal vehicles instead of public transportation are rich. 
A cylindrical roller made or iron is 1.2 m long. Its internal radius is 24 cm and thickness of the iron sheet used in making the roller is 15 cm. What is the mass (in kg) of the roller, if 1 cm3 of iron has 8 g mass?
A roller is 70 cm long and has a diameter of 2 cm. It takes exactly 100 rotations of the roller to level a road. If the cost of using the roller is 0.5 rupees per square cm, then what is the cost of levelling the road?
A road roller has a total mass of 12 tonnes. The front roller has a mass of 2 tonnes, a radius of gyration of 0.4 m and a diameter of 1.2 m. The rear axle, together with its wheels, has a mass of 2.5 tonnes, a radius of gyration of 0.6 m and a diameter of 1.5 m. Calculate total kinetic energy of road roller.
A road roller has a total mass of 12 tonnes. The front roller has a mass of 2 tonnes, a radius of gyration of 0.4 m and a diameter of 1.2 m. The rear axle, together with its wheels, has a mass of 2.5 tonnes, a radius of gyration of 0.6 m and a diameter of 1.5 m. Calculate braking force required to bring the roller to rest from 9 km/h in 6 m on the level.
The question given below consists of a statement, followed by three arguments I, II and III. You have to decide which of the arguments is/are ‘strong’ arguments is/are ‘weak’ arguments and accordingly choose your answer from the alternatives given below each question. Statement: The government is working on a plan to set up a waterway freight corridor to connect the mainland with the northeastern states via Bangladesh at a cost of Rs 5,000 crore. The move would substantially reduce the time taken to transport goods to the eight northeastern states and costs.  Which of the following support the idea that the time of transportation will be reduced between the eight northeastern states? Arguments: I.The proposed 900-km waterway would be used to transport freight from the northern and eastern states to the northeast and would start near Haldia in West Bengal, go to the Sundarbans, merge into the Padma river in Bangladesh and then join up with the Brahmaputra in Assam.  II. Currently, highway connectivity to the northeastern states is patchy and transportation of goods by road entails a high cost and takes time. According to the ministry’s estimate, the waterway could help reduce the cost of transportation by about 70%.  III. The government is already developing a waterway along the Ganga river between Haldia and Allahabad (1,620 km) at a cost of Rs 4,500 crore. This link will also be utilised for trade between India and Bangladesh.