Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Molten steel is kept in a ladle. Due in natural convection. mixing occurs inside the melt. A 1cm diameter sphere is held in the centre of the melt where the steel flows upward. so as to measure the force exerted by the melt on the sphere. The force. F exerted by the melt on the sphere is given by $$F = f\left( {\frac{\pi }{8}} \right).\left( {\frac{{{\mu ^2}}}{8}} \right){\left( {\operatorname{Re} } \right)^2}.$$
Data: Density of liquid steels
= 7100 kg. m-3
Viscosity of liquid steel
= 6.5 × 10-3 kg. m-1. s-1
Reynolds number (Re) of the melt
= 5 × 103
Friction factor (f) = 0.3
The velocity of melt (m.s-1) in the central portion of the ladle would be
Melt spinning of polymers involves the forcing of polymer melt through spinnerettes (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres.
Match List-I with List-II and select the correct answer using the code given below the Lists: List I (Low-Latitude Climate) List I (Characteristic) A. Wet Equatorial 1. Uniform temperatures, mean near 27°C  B. Monsoon and trade wind coastal 2. Marked temperature cycle with very high temperature before the rainy season C. Wet-dry tropical  3. Temperatures show an annual cycle with a high temperature in the high-Sun season Strong temperature cycle. with intense temperature during the high-Sun season  D. Dry tropical 4. Strong temperature cycle, with intense temperature during the high-Sun season
If the solubilities of different components (in a liquid-liquid extraction system) increase with rise in temperature, then the temperature above which they dissolve completely is known as the critical solution temperature (CST or consolute temperature). If solubilities increase with decrease in temperature, then CST is the temperature below which they dissolve completely. If a binary system has no critical solution temperature, it implies that
In the chill zone of ingots, if the pouring temperature is low the whole of the liquid will be rapidly cooled below the liquidus temperature and the crystals swept into the melt may be able to continue to grow. This is known as______
The heat treatment process in which a steel is heated to a temperature below the A1 (Temperature is below process annealing temperature) and is held at this temperature for sufficient time and then cooled is called
Consider the following statements: 1. The relative humidity of air does not change with temperature as long as specific humidity remains constant. 2. Dew-point temperature is the temperature at which condensation begins when air is cooled at constant volume. 3. Saturated air passing over a water surface does not cause change of air temperature. 4. For saturated air, dry-bulb, wet-bulb and dew-point temperatures are identical. Which of the above statements are correct?
Directions : For the Assertion (A) and Reason (R) below, choose the correct alternative Assertion(A) : Increase in carbon dioxide would melt polar ice. Reason (R) : Global temperature would rise
At what temperature does iron melt?
At what temperature does Quartz glass melt?