Bissoy.com
Doctors Medicines MCQs Q&A

In vacuum die casting, the molten metal enters into the cavity slowly as compared to the die casting.

In vacuum die casting, the molten metal enters into the cavity slowly as compared to the die casting. Correct Answer False

The removal of all the gases from the die cavity makes a vacuum inside the cavity, so there is no pressure or force inside the cavity which could be opposite to the injecting pressure of the molten metal. So, the molten metal enters much faster into the die, thereby decreasing the fill time.

Related Questions

In vacuum die casting, the molten metal does not experience any back pressure while injecting it into the die cavity.
In vacuum die casting, the melt enters into the mould cavity with less speed than that in the die casting technique.
In low-pressure die casting, metal enters the mould very slowly as compared to the die casting.
The riser is a reservoir of molten metal provided in the casting so that hot metal can flow back into the mould cavity when there is a reduction in the volume of metal due to?
Seven contestants, H, I, J, K, L, M and N, have their entry on stage at the Miss World contest in a certain sequence. I enters exactly before M. J enters exactly after N. Exactly one contestant enters on stage after M and before H in the same order. L enters third. H enters last. Based on the given information, which of the following options is true?
In hot chamber die casting processes, downward motion of plunger in the gooseneck leads to injection of molten metal into the cavity with high pressure.
In the squeeze casting method, extreme care is taken while pouring of molten metal into the die cavity.
Given that the wave number of a circular cavity resonator is 151 (TE011 mode), and the length of the cavity is twice the radius of the cavity, the radius of the circular cavity operating at 5GHz frequency is:
In hot chamber die casting, the plunger is also used for taking back of unused molten metal to the gooseneck after the fulfilling of the cavity.
Which of the following casting technique, a seed crystal is dipped into the molten metal and then pulled out slowly?