Bissoy.com
Doctors Medicines MCQs Q&A

In permanent mould casting, only the metallic type of cores can be used, as the mould material used is also metallic.

In permanent mould casting, only the metallic type of cores can be used, as the mould material used is also metallic. Correct Answer False

Cores are used in permanent mould casting for making any hollow portions in the casting. The cores can be made out of metal or sand also when sand cores are used in the casting, the process is called semi-permanent moulding. The sand core of complex shapes can be used with undercuts easily in the casting.

Related Questions

In permanent mould casting method, metallic cores are mainly used instead of sand cores.
In permanent mould casting, the mould is pre-heated to its operating temperature before the actual use of mould.
A 250 mm by 250 mm ingot casting, 1.5 m high and at 1225 K temperature, is stripped from its mold. The casting is made to stand on end on the floor of a large foundry whose wall, floor and roof can be assumed to be at 300 K temperature. Make calculation for the rate of radiant heat interchange between the casting and the room. The casting material has an emissivity of 0.85
The thickness of the metallic wall of the mould can be used to determine the wall thickness of the casting part in slush casting.
In permanent mould casting, the temperature at which the mould is used does not depend on _____
Which of the following features of the Permanent Settlements of 1793 is/are correct? 1. The Permanent Settlements vested land ownership rights in the peasants 2. The Permanent Settlement vested land ownership rights in the Zamindars 3. The Zamindars had to pay a fixed amount of rent by a particular date 4. The Zamindars benefited hugely from the Permanent Settlement while the peasants suffered Select the correct answer using the code given below:
At the mould exit of a continuous caster, the metal consisting of a solidified shell with a liquid metal core exits at the rate of 35 kg S-1. Given that the latent heat of fusion is 3 × 105 J kg-1 and the total rate of heat removal by the mould is 4.2 × 106 W, the mass fraction of solid at the mould exit is . . . . . . . .
Assume that both while solid and liquid remain at the melting point, they are in the mould.
Metallic core is more preferable than the sand core in the permanent mould casting.
Permanent mould casting is suited to low volume production of moderate or complex shapes of casting.
Which of the following considerations distinguish die casting from the permanent mould casting?