Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

At the mould exit of a continuous caster, the metal consisting of a solidified shell with a liquid metal core exits at the rate of 35 kg S-1. Given that the latent heat of fusion is 3 × 105 J kg-1 and the total rate of heat removal by the mould is 4.2 × 106 W, the mass fraction of solid at the mould exit is . . . . . . . .
Assume that both while solid and liquid remain at the melting point, they are in the mould.
Over-curing or under-curing of the shell mould, leads to the generation of sophisticated problems in the shell mould.
The critical reasoning question is based on a short argument, a set of statements, or a plan of action. For each question, select the best answer of the choices given. The size of particles is directly linked to their potential for causing health problems. Small particles less than 10 micrometers in diameter cause the greatest problems, as they can get deep into the lungs and some may get into the bloodstream. One being exposed to such particles can affect both the lungs and the heart of a person. But there are particles that are causing environmental effects too, few of which are given below.  Which among the following below options does not talk about the effects of these particles on the environment?
Consider the following statements: a. Beta particles are negatively charged and are more penetrating than Alpha particles, which are positively charged. b. Gamma particles are neutral and are more penetrating than Beta-particles. c. In general neutral particles can be said to be having very high penetrating power.
In a press there are three types of printing machines A, B, and C. Machine A can print ten thousand pages in 8 hours, machine B can do the same task in 10 hours, and machine C can do the same task in 12 hours. All three machines start the task at 9∶00 a.m. Machine A breaks down at 11∶00 a.m. and machines B and C continue working. At 12∶00 noon machine B also breaks down and machine C alone has to complete the remaining task. What is the approximate time of completion of the task?
Suppose we want to design a synchronous circuit that processes a string of 0’s and 1’s. Given a string, it produces another string by replacing the first 1 in any subsequence of consecutive 1’s by a 0. Consider the following example. Input sequence: 00100011000011100 Output sequence: 00000001000001100 A Mealy Machine is a state machine where both the next state and the output are functions of the present state and the current input. The above mentioned circuit can be designed as a two-state Mealy machine. The states in the Mealy machine can be represented using Boolean values 0 and 1. We denote the current state, the next state, the next incoming bit, and the output bit of the Mealy machine by the variables s, t, b and y respectively. Assume the initial state of the Mealy machine is 0. What are the Boolean expressions corresponding to t and y in terms of s and b ?
Consider the following statements regarding milling machine: 1. In the vertical milling machine, it Is possible to machine dovetail recesses. 2. In universal milling machine, the worktable can be swivelled. 3. In rotary milling machine, motion imparted to work is rotary. 4. Planer milling machine is provided with several horizontal and vertical heads. Which of the above statements are correct?
When a pattern is to be withdrawn from the mould, it is first shaken, by striking over it from side to side, so that its surface may be free of the adjoining sand wall of the mould. That causes the size of the mould cavity increases a little and a negative allowance is to be provided in the pattern to compensate the same, is known as:
In permanent mould casting, the mould is pre-heated to its operating temperature before the actual use of mould.
Continuous passing of Co2 through the mould can decrease the strength of mould and results in a weak mould.