Related Questions

For increased operating chamber pressure, the length of the combustion chamber ________ and the nozzle throat area _________ if the diameter of the combustion chamber (assume the shape to be cylindrical) is fixed and the thrust remains constant.
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
A 15kg of air is supplied per kg of fuel burnt to the combustion chamber of a boiler using fuel 600kg/hr. the temperature of flue gases and ambient air are 273°C and 32°C. If the minimum draught required to start the flue is 9.5mm of water, find out the minimum height of the chimney?
What is minimum amount of air required per m3 of gaseous fuel for complete combustion? m3/m3 of fuel b) 1/100 m3/m3 of fuel c) 1/21 m3/m3 of fuel d) 1/100 m3/m3 of fuel
In an internal combustion engine, the process of removing the burnt gases from the combustion chamber of the engine cylinder is known as
With reference to 'fuel cells' in which hydrogen rich fuel and oxygen are used to generate electricity. Consider the following statements.
1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by products.
2. Fuel cells can be used for powering buildings and not for small devices like laptop, computers.
3. Fuel cells produce electricity in the form of Alternating Current (AC).
Which of the statements given above is/are correct?
In addition to the pancake sorting problem, there is the case of the burnt pancake problem in which we are dealing with pancakes (discs) that are burnt on one side only. In this case it is taken that the burnt side must always end up _______
Those engines where fuel is burnt inside the combustion chamber are called-
Those engines where fuel is burnt outside the combustion chamber are called-
A pre-combustion chamber gives a shorter delay compared to an open type of combustion chamber.