Bissoy.com
Doctors Medicines MCQs Q&A

Average thickness of double cover plate butt joint is 0.75 times that of main plate.

Average thickness of double cover plate butt joint is 0.75 times that of main plate. Correct Answer True

Thickness of cover plate in a double cover plate butt joint is about 0.7 to 0.8. An average thickness of double cover plate butt joint is 0.75 times the thickness of the main plate. Here, main plate is always thicker than cover plate.

Related Questions

When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.
Simplify the value of $$\frac{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} \times {\text{0}}{\text{.3}} - {\text{3}} \times 0.9 \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}}}}{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} - 0.9 \times {\text{0}}{\text{.2}} - {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}} - 0.3 \times 0.9}} = ?$$
Why is double cover butt joint preferred over single cover butt joint or lap joint?
$$\frac{{38 \times 38 \times 38 + 34 \times 34 \times 34 + 28 \times 28 \times 28 - 38 \times 34 \times 84}}{{38 \times 38 + 34 \times 34 + 28 \times 28 - 38 \times 34 - 34 \times 28 - 38 \times 28}}$$            is equal to = ?
In single riveted, double strap butt joint, what will be that possible thickness of the cover plate/strap ts, if the thickness of the main plate is t?
If one cover plate is used, thickness of cover plate is kept _________ times that of the main plate.
Two 16 mm thick main plates are joined by rivets using the double cover butt joint with 10 mm thick cover plates as shown in figure. Bearing failure will occur first in
Calculate bearing strength of 20mm diameter bolt of grade 4.6 for joining main plates of 10mm thick using cover plate of 8mm thick using single cover butt joint.
A butler stole wine from a butt of sherry which contains 15% of spirit and he replaced what he had stolen with wine containing 6% of spirit. The butt was then 9% strong only. How much of the butt did he steal?