Bissoy.com
Doctors Medicines MCQs Q&A

d=6√t is the equation for diameter (d) and thickness (t) when _________

d=6√t is the equation for diameter (d) and thickness (t) when _________ Correct Answer d and t are in millimeters

Given formula is a relation of diameter and thickness of rivet when d and t are in millimeters. If d and t are in inches then d is not equal to 6 times of square root of t but 1.2 times of square root of t. values of d and t may be taken from standard tables but the condition in the formula must be satisfied.

Related Questions

Thickness of 8 tyres L, M, N, O, P, Q, R and S is compared. Thickness of no two tyres is same. Thickness of N is more than L but less than 6 tyres. Thickness of O is more than M but less than Q. Thickness of P is less than only two tyres. Thickness of Q is not more than P. Which of the following statement is not correct?
A class III mathematics teacher gave the following questions to her students:  \(\begin{equation} \frac{ \begin{array}[b]{r} 256 \\ + 173 \end{array} }{ } \end{equation}\) \(\begin{equation} \frac{ \begin{array}[b]{r} 28 \\ + 32 \end{array} }{ } \end{equation}\) \(\begin{equation} \frac{ \begin{array}[b]{r} 129 \\ + 76 \end{array} }{ } \end{equation}\) Later she asks the students to solve a worksheet that has similar questions. Which of the following statements is appropriate for the given situation?
Which one of them is a correct combination? 1) Boundary Lubrication i) Dimensionless film thickness < 1 2) Hydrodynamic Lubrication ii) Dimensionless film thickness lies between 1 and 3 3) Mixed Lubrication iii) Dimensionless film thickness lies between 3 and 5 4) Elastohydrodynamic Lubrication iv) Dimensionless film thickness is greater than 5
If t1 denotes the uncut chip thickness and t2 denotes cut chip thickness ratio then, which of the following equation is correct about chip thickness ratio ‘r’?
In measuring the chordal thickness, the vertical scale of a gear tooth caliper is set to the chordal or corrected addendum to locate the caliper jaws at the pitch line.If a = addendum, t = circular thickness of tooth at pitch diameter D, then chordal thickness is equal to
A steel pipe of 20 mm inner diameter and 2 mm thickness is covered with 20 mm thick of fiber glass insulation (k = 0.05 W/m degree). If the inside and outside convective coefficients are 10 W/m2 degree and 5 W/m2 degree, calculate the overall heat transfer coefficient based on inside diameter of pipe. In the diagram, the diameter of small circle is 20 mm
Consider we have a Double Pipe Heat Exchanger, with the inner tube of Outer diameter 20mm (thickness 2mm) and outer tube of inner diameter 30mm. We have two fluids A & B, we desire to have their flow rates as 15Kg/s and 21Kg/s respectively. What is the value of Hydraulic diameter for the annulus tube?
Equimolar counterdiffusion of A and B occurs through a spherical film of i.d=ri and thickness δ. The flux of A is NA1 at r=ri. The flux through a flat film of the same thickness is NA2. if NA1 is larger than NA2 by 5%, the film thickness δ is
The correct relationship among displacement thickness d, momentum thickness m and energy thickness e is
Find the approximate thickness of web if b is 0.5d, d is 270mm, d/h ratio is 0.85, h is 315mm, adopt effective depth, d = 275mm overall depth , h is 320mm, width of flange of 160mm and Average thickness of flange is 70mm since sloping flanges are used, increases the flange thickness by 20 percent?