Bissoy.com
Doctors Medicines MCQs Q&A

When the cutting plane cuts the entire object the section is known as _______

When the cutting plane cuts the entire object the section is known as _______ Correct Answer Full section

When the cutting plane cuts the entire object the section is known as a full section. This method of sectioning is mostly used in sectioning work. It gives the total object details in one section.

Related Questions

Consider the following statements: 1. HSS tools wear very rapidly, whereas in cemented carbide tools, even though hardness is retained, crater wear can occur due to solid-state diffusion. 2. Cutting tools made of Super-HSS, also known as cobalt-based HSS, are made by adding 2% to 15% of cobalt which increases the cutting efficiency at heavier cuts by increasing the hot hardness and wear resistance. 3. Tools failure due to excessive stress can be minimized by providing small or negative rake angles on brittle tool materials, protecting tool tip by providing large side-cutting edge angles, and honing a narrow chamfer along the cutting edge. Which of the above statements are correct?
A group of 74 students of Class XI went on picnic. The number of students who went on picnic by each section is as follows: Section A = 15 Section B = 24 Section C = 15 Section D = 20 5 students from Section A spent as much as 4 students from Section B. 12 Section B students spent as much as 9 Section C students and 6 Section C students spent as much as 8 Section D student. If every student of a particular section spent the same amount and all the students spent Rs. 23,370 altogether, find the amount spent by each student of Section D?
Last year, there were three sections in a competitive exam. Out of them 33 students cleared the cut-off in Section A, 34 students cleared the cut-off in Section B and 32 students cleared the cut-off in Section C. 10 students cleared the cut-off in section A and section B, 9 cleared the cut-off in section B and section C and 8 cleared the cut-off in section A and section C. The number of students who cleared only one section was equal and was 21 for each section. How many students cleared all the three sections?
A plane cuts the cylinder the plane is not parallel to the base and cuts all the generators. The Cross-section is _________
A plane cuts the cylinder and the plane is parallel to the base and cuts all the generators. The Cross-section is _________
This are the following statements given regarding satellite’s motion a. A satellite in geostationary orbit lies in the same plane with equator b. A satellite in geosynchronous orbit lies in the same plane with equator c. A satellite in geostationary orbit does not lie in the same plane with equator, it is inclined at some angle from plane of equator d. A satellite in geosynchronous orbit does not lie in the same plane with equator, it is inclined at some angle from plane of equator Choose one of the following options
A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from the vertical plane and 5 cm from the horizontal plane. What is distance from the point on line far away from the profile plane to profile plane?
The relation for cutting tool life is given as VTn = c, where V is cutting speed, T is corresponding life, n and c are constants depending on cutting conditions. The numerical value of n for roughing cut as compared to that for light cuts in mild steel would be
Which of the following distinguishes section 34 of Indian Penal Code from section 149, Indian Penal Code?
1. Section 149 creates a substantive offence whereas section 34 does not create an offence.
2. Section 149 requires common object whereas section 34 requires common intention.
3. Section 149 requires five or more persons whereas section 34 requires two or more persons.
Select the correct answer:
Consider the following statements:
1. Section 34 of Indian Penal Code requires two persons whereas Section 149 of Indian Penal Code require five persons.
2. Section 34 of Indian Penal Code requires common intention, whereas Section 149 of Indian Penal Code requires common object
3. Section 34 of Indian Penal Code and Section 149 of Indian Penal Code both require presence of a prior consent
4. Section 34 of Indian Penal Code and section 149 of Indian Penal Code. Both create specific offence
Which of the above statements are correct?