Bissoy.com
Doctors Medicines MCQs Q&A

Twenty degree full depth involute profiled 19-tooth pinion and 37-tooth gear are in mesh. If the module is 5 mm, the centre distance between the gear pair will be

Twenty degree full depth involute profiled 19-tooth pinion and 37-tooth gear are in mesh. If the module is 5 mm, the centre distance between the gear pair will be Correct Answer 140 mm

Centre distance = D1 + D2/2 = mT1 + mT2/2 = 5(19 + 37)/2 = 140 mm.

Related Questions

The velocity ratio between pinion and gear in a gear drive is 2.3, the module of teeth is 2.0 mm and sum of number of teeth on pinion and gear is 99. What is the centre distance between pinion and the gear?
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
If the centre distance between a pair of spur gears in mesh is 240 mm and the pinion moves five times faster than the gear, then the pitch circle diameters of pinion and gear respectively are
Two involute gears in a mesh have a module of 10 mm and the pressure angle is 35°. The larger gear has 45 teeth whereas the pinion has 15 teeth. The addendum is equal to one module. Find the arc of contact.
Let D be a simple graph on 10 vertices such that there is a vertex of degree 1, a vertex of degree 2, a vertex of degree 3, a vertex of degree 4, a vertex of degree 5, a vertex of degree 6, a vertex of degree 7, a vertex of degree 8 and a vertex of degree 9. What can be the degree of the last vertex?
The interference between a given pinion tooth and a gear tooth can be avoided by using 1. smaller pressure angle 2. larger pressure angle 3. Less number of teeth on the gear for a pinion with predefined number of teeth 4. More number of teeth on the gear for a pinion with predefined number of teeth Which of the above statements are correct?
Mohan traveled five cities (A, B, C, D and E) starting from home by a car which has a mileage such that the car can travel 10 km in 1 liter petrol. Distance between city A and B is twice the distance between home to city A. Distance between city B and C is thrice the distance between home to city A. Distance between city C and D is 100. Distance between city D and E is 1.5 times than the distance between B and C. Average distance traveled by Mohan was 41 km between five cities. Find how much petrol was needed by Mohan to travel from city B to D.
The minimum number of teeth on the pinion which will mesh with any gear without interference for 200 full depth involute teeth will be
The minimum number of teeth on the pinion which will mesh with any gear without interference for 20° full depth involute teeth will be
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.