Bissoy.com
Doctors Medicines MCQs Q&A

____________ gears are used for obtaining large speed reduction between non-intersecting shafts making an angle of 900 with each other.

____________ gears are used for obtaining large speed reduction between non-intersecting shafts making an angle of 900 with each other. Correct Answer worm gears

Worm gears are used for obtaining large speed reduction between non-intersecting shafts making an angle of 900 with each other. Gears having teeth cut on the rotating face plane of the gear and mate with standard involute spur gears are known as face gears.

Related Questions

What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses.
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
When bevel gears connect two shafts whose axes intersect at an angle greater than a right angle and one of the bevel gears has a pitch angle of 90°, then they are known as
Tapered involute gears which can couple intersecting shafts, skew shafts, and parallel shafts are known as
Consider the following statements: 1. In spur gears, the contact occurs abruptly on a line parallel to the axis, and the disengagement too is abrupt. 2. In helical gears, both loading and unloading are gradual, and therefore, these happen more smoothly and less noisily 3. When two gears mesh, any arbitrary shape of the tooth can be chosen for the profile of the teeth of any one of the two gears, and the profile for the other shall be obtained by applying the law of gearing. Which of the above statements are correct?
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Superman and Batman in their boat are moving towards each other If Superman travel against the stream and Batman along the stream they are at a distance of 2300 km from each other. If the Speed of Stream is 20 km/h and Speed of Superman’s Boat is 100 km/h and Speed of Batman’s Boat is 130 km/h. Find the Time Taken to meet each other Quantity B: Tony Stark is flying in his suit 1 hour before Captain America with the speed of 200 km/h. If Captain America is chasing him in the boat which runs at a speed of 270 km/h against a stream which has speed of 20 km/h. Find the time in which he catches the Tony Stark.
Statement (I): Two  non-intersecting and non-parallel, i.e., non-coplanar, shafts connected by gears are called skew-bevel gears or spiral gears, and this type of gearing has a line contact the rotation of which about the axes generates the two hyperboloid pitch surfaces. Statement (II): A hyperboloid is a 3D surface formed by revolving a straight line about an axis (not in the same plane), such that every point on the line remains at a constant distance from the axis.
If Rati travels at his usual speed for ‘x’ hours, he covers the same distance as he covered when he travels at a speed 30 km/hr less than usual, but for (x + 3) hours. Which of the following can be determined? (A) If he travels at 20 km/hr less speed than usual, he can cover a distance of 240 km in (x - 1) hours. What is the value of ‘x’? (B) If travels at his usual speed for (t + 2) hours, and at 50% of his usual speed for (t - 2) hours, his average speed for the journey is 68 km/hr. What is his usual speed? (C) His usual speed (in km/hr) is a multiple of 5 between 40 and 50 (both inclusive). If ‘x’ is a whole number, what is his usual speed? (D) If he travels at his usual speed for ‘t’ hours, he covers a distance of 400 km. What is the value of ‘x’?