Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements: The axis of spiral bevel gear are non-parallel and intersecting. 1) The most common pressure angle for spiral bevel gear is 20° 2) The most common spiral angle for spiral bevel gear is 35. 3) Spirals bevel gears are generally interchangeable. 4) Spirals are noisy and recommended for low speeds of 10 m /s. Which of the above statements are correct?
For a bevel gear having the pitch angle $$\theta $$, the ratio of formative number of teeth (TE) to actual number of teeth (T) is
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
The interference between a given pinion tooth and a gear tooth can be avoided by using 1. smaller pressure angle 2. larger pressure angle 3. Less number of teeth on the gear for a pinion with predefined number of teeth 4. More number of teeth on the gear for a pinion with predefined number of teeth Which of the above statements are correct?
If T is the actual number of teeth on a helical gear and $$\varphi $$ is the helix angle for the teeth, then formative number of teeth is written as
If T is the actual number of teeth on a helical gear and φ is the helix angle for the teeth, the formative number of teeth is written as
A fixed gear having 200 teeth is in mesh with another gear having 50 teeth. The two gears are connected by an arm. The number of turns made by the smaller gear for one revolution of arm about the centre of bigger gear is
A fixed gear having 100 teeth meshes with another gear having 25 teeth, the centre lines of both the gears being joined by an arm so as to form an epicyclic gear train. The number of rotations made by the smaller gear for one rotation of the arm is
The velocity ratio between pinion and gear in a gear drive is 2.3, the module of teeth is 2.0 mm and sum of number of teeth on pinion and gear is 99. What is the centre distance between pinion and the gear?