Bissoy.com
Doctors Medicines MCQs Q&A

A fixed gear having 200 teeth is in mesh with another gear having 50 teeth. The two gears are connected by an arm. The number of turns made by the smaller gear for one revolution of arm about the centre of bigger gear is

A fixed gear having 200 teeth is in mesh with another gear having 50 teeth. The two gears are connected by an arm. The number of turns made by the smaller gear for one revolution of arm about the centre of bigger gear is Correct Answer 4

N1 = 200 N2 = 50 Number of turns = N1/N2 = 200/50 = 4.

Related Questions

A fixed gear having 100 teeth meshes with another gear having 25 teeth, the centre lines of both the gears being joined by an arm so as to form an epicyclic gear train. The number of rotations made by the smaller gear for one rotation of the arm is
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
Consider the following statements: 1. In spur gears, the contact occurs abruptly on a line parallel to the axis, and the disengagement too is abrupt. 2. In helical gears, both loading and unloading are gradual, and therefore, these happen more smoothly and less noisily 3. When two gears mesh, any arbitrary shape of the tooth can be chosen for the profile of the teeth of any one of the two gears, and the profile for the other shall be obtained by applying the law of gearing. Which of the above statements are correct?
The interference between a given pinion tooth and a gear tooth can be avoided by using 1. smaller pressure angle 2. larger pressure angle 3. Less number of teeth on the gear for a pinion with predefined number of teeth 4. More number of teeth on the gear for a pinion with predefined number of teeth Which of the above statements are correct?
Statement (I): The epicyclic gear train has a central gear and an epicyclic gear which produces epicyclic motion being moved by a crank arm. Statement (II): The arm contains the bearings for the epicyclic gear to maintain two gears in mesh. 
The normal circular pitch of two helical gears in a mesh is 7 mm. If the number of teeth on the smaller gear is 22 and the gear ratio is 2, find the pitch diameters of the gears. Ψ1 = 40° and Ψ2 = 25°.
Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for
The pressure angle of two gears in a mesh is φ = 25°. The number of teeth on the pinion is 25 and the number of teeth on the gear is 70. The module is given to be 10 mm. The addendum is 1.1 times the module. Find the path of approach and path of contact of these gears.
Jay’s cat is bigger than Amy’s cat, but is smaller than Jaini’s cat. Fija’s cat is the same size as Venu’s cat, which is bigger than Amy’s cat, but smaller than Jay’s. If bigger cats are faster, but smaller cats are more obedient, select from the following list the pair of keepers who have the fastest and most obedient cats.