Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In how many categories heat exchangers are classified on the basis of physical state of heat exchanging fluids?
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow, and k = Thermal conductivity of the body)
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow and k = Thermal conductivity of the body)
The important design and operating considerations for Extended-Surface Compact Heat Exchangers are: (1) Both fluids may have high or low heat transfer coefficients (2) As the tubes are very narrow (low DH), the fluid used should not be corrosive as effective cleaning of tubes is not possible. (3) The fluid pressure drop calculation is important as a regulatory method to ensure long life of the tubes. (4) Unlike shell and tube type heat exchangers, these are limited when it comes to operating pressure and temperature.
How many Heat Exchangers can be classified on the basis of flow passes of the fluids?
In how many categories heat exchangers are classified on the basis of mechanical design of heat exchanger surface?
Are these statements about the regenerative heat exchangerstrue? Statement 1: Regenerators are commonly used in gas/gas heat recovery applications. Statement 2: Regenerative heat exchangers are also known as capacitive heat exchangers.
Which of the following statements about two-phase heat exchangers are correct? Statement 1: Two-phase heat exchangers undergo phase change during the heat transfer process. Statement 2: It is used mainly in water-to-water heat transfer applications.
A designer chooses the values of fluid flow rates and specific heats in such a manner that the heat capacities of the two fluids are equal. A hot fluid enters the counter flow heat exchanger at 100°C and leaves at 60°C. A cold fluid enters the heat exchanger at 40°C. The mean temperature difference between the two fluids is
Statement 1: Scraping improves heat transfer co-efficient by 5 times in case of non-Newtonian fluids. Statement 2: In food industry, major physical changes to food items when they’re processed, take place like transformation from Newtonian to Non-Newtonian fluids. Hence, scraped surface heat exchangers are very beneficial.