Bissoy.com
Doctors Medicines MCQs Q&A

The sensitivity of thermocouple is defined as the time required by thermocouple to reach how much percentage of its steady state values?

The sensitivity of thermocouple is defined as the time required by thermocouple to reach how much percentage of its steady state values? Correct Answer 63.3

The time constant of a thermocouple represents the time required to attain 63.2% value.

Related Questions

Garima starts walking towards the south from point R. He walks for 5m to reach Point S then turns right and walks for 2m to reach point T from there he turns left and walks for 3m to reach Point Z. He then turns right from point Z and walks for 6m to reach point Y and then turns right and walks for 3m to reach point X. He then turns right from point X and walks for 4m to reach point W and then turns left and walks for 5m to reach point V and then turns left and walks for 4m till point U and stops. What is the shortest distance between point V and point R?
A man starts from point ‘O’, travels 20 km towards east to reach point ‘A’, turns right and travels 10 km to reach point ‘B', turns right and travels 9 km to reach point ‘C’, turns right and travels 5 km to reach point ‘D’, turns left and travels 12 km to reach point ‘E’ and then turns right and travels 6 km to reach point ‘F. What is the shortest distance between point ‘E’ and point ‘C’?
A man starts from point 'O', travels 20 km towards east to reach point 'A', turns right and travels 10 km to reach point 'B', turns right and travels 9 km to reach point 'C', turns right and travels 5 km to reach point 'D', turns left and travels 12 km to reach point 'E' and then turns right and travels 6 km to reach point 'F'. What is the shortest distance between point 'E' and point 'C'?
“The response of a thermocouple is defined as the time required for the thermocouple to reach the surrounding temperature when it is exposed to it”.
The below table provides the thermos-emf sensitivity of five materials with reference to platinum around 273 K. Material Constantan Nickel Copper Iron Nichrome Sensitivity (μVK-1) -35 -25 +6 +18.5 +25 Which one of the following thermocouple pairs has maximum sensitivity around 273 K?
Consider a measuring system consisting of a sensor, an amplifier and an oscilloscope. The sensitivity of each equipment is as follows : Sensor sensitivity : 0.4 mV/°C, Amplifier gain : 5.0 V/mV, and Oscilloscope sensitivity : 10 mV/V. What is the sensitivity of complete measurement system ?
Consider the following statements: 1. The delay time is the time required to reach 50% of the final value in the first time. 2. The rise time is the time required for the response to rise from 10% to 90% of its final value for underdamped systems. 3. The rise time is the time required for the response to rise from 0 to 100% for the underdamped systems. Which of these statements are correct?
A thermocouple junction in the form of 4 mm radius sphere is to be used to measure the temperature of a gas stream. The junction is initially at 35 degree Celsius and is placed in a gas stream which is at 300 degree Celsius. The thermocouple is removed from the hot gas stream after 10 seconds and kept in still air at 25 degree Celsius with convective coefficient 10 W/m2 K. Find out the time constant of the thermocouple. Assume the thermos-physical properties as given below h = 37.5 W/m2 K p = 7500 kg/m3 c = 400 J/kg K
A thermocouple junction of spherical form is to be used to measure the temperature of the gas stream. The junction is at 20 degree Celsius and is placed in a gas stream which is at 200 degree Celsius. Make calculations for time required by the thermocouple to reach 197 degree Celsius temperature. Assume the thermos-physical properties as given below k = 20 W/ m K h = 350 W/m2 K c = 0.4 k J/kg K p = 8000 kg/m3
The following data pertains to the junction of a thermocouple wire used to measure the temperature of the gas stream. Density = 8500 kg/m3, specific heat = 325 J/kg K, thermal conductivity = 40 W/m K and the heat transfer coefficient between the junction and gas = 215 W/m2 K. If thermocouple junction can be approximated as 1 mm diameter sphere, determine how long it will take for the thermocouple to read 99% of the initial temperature difference