Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In a diesel engine
1. Fuel injection pump is used
2. Fuel injection pump and carburettor is used
3. Fuel injector is used
4. Neither fuel injection pump nor injector is used
In an electronic fuel injection system, the ECU calculates the optimum fuel injection volume for the current engine condition based on data from a wide range of sensor, and it injects this volume of fuel into the intake manifold at the optimum timing.
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
The pie chart given below shows the fuel consumption by five vehicles V1, V2, V3, V4 and V5. In a month total fuel consumption by all five vehicles is 720 litre. Fuel consumption of a particular vehicle is shown in terms of degree with respect to the total fuel consumption by all these five vehicles. J1 = Difference between the fuel consumption of V4 and V5. J2 = Difference between the fuel consumption of V1 and V2. What is the value of J2 – J1?
With reference to 'fuel cells' in which hydrogen-rich fuel and oxygen are used to generate electricity, consider the following statements: 1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by-products. 2. Fuel cells can be used for powering buildings and not for small devices like laptop computers. 3. Fuel cells produce electricity in the form of Alternating Current (AC) Which of the statements given above is/are correct?
With reference to 'fuel cells' in which hydrogen rich fuel and oxygen are used to generate electricity. Consider the following statements.
1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by products.
2. Fuel cells can be used for powering buildings and not for small devices like laptop, computers.
3. Fuel cells produce electricity in the form of Alternating Current (AC).
Which of the statements given above is/are correct?
In an electronic fuel injection, variation of air-fuel ratio is almost negligible even when the vehicle takes different positions like turning, moving on gradients, uneven roads, etc.
The fuel injector system, in which a large manifold is continuously fed with fuel by a common pump, with high fuel pressure, that separate from the injectors is known as:
Which component of the carburettor is used to maintain a constant level of fuel in the carburettor?
The three major problems faced in the process of partition of India were:
1. Areas were supposed to be distributed on the basis of religious majority.
2. No single belt of Muslim majority was the part of British India. They were concentrated in east and west.
3. Some Muslim majority areas did not want to be merged with Pakistan.
4. Another problem belonged to majority on both sides of border.
Select the correct answer from the options given below: