Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Speed reduction in a gear box is achieved using a worm and worm wheel. The worm wheel has 30 teeth and a pitch diameter of 210 mm. If the pressure angle of the worm is 20o, what is the axial pitch of the worm?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
A pair of worm gear is written as 2/40/12/6. Calculate the throat diameter of the worm wheel.
A pair of worm gear is written as 2/40/12/6. Calculate the root diameter of the worm wheel.
In a single threaded worm and worm wheel, the number of teeth on the worm is 50. The diameter of the effort wheel is 100 mm and that of load drum is 50 mm. The velocity ratio is
Find the helix angle of the worm if the pitch of the worm gear is 12 mm and the pitch diameter is 50 mm.
A speed reducer unit consists of a double-threaded worm of pitch = 11 mm and a worm wheel of pitch diameter = 84 mm. The ratio of the output torque to the input to rque is
Which of the following statements is/are true? A: If a circle is formed from a wire, which was initially in the shape of a semi-circle, then ratio of radius of circle and that of semi-circle will be 7: 11. B: If in a semi-circle of radius ‘r’, another semi-circle of radius ‘4r/5’ is drawn, then area of the remaining part of larger semi-circle will be ‘3πr2/5’. C: In a circle of radius ‘r’, if ‘O’ is the center of circle and radii OA and OB are at the angle of 45°, then the length of major arc AB will be ‘7πr/8’.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is