Bissoy.com
Doctors Medicines MCQs Q&A

A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the length of the arm C.

A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the length of the arm C. Correct Answer 250mm

L=/2 where da=5×30 and Db=5×70.

Related Questions

A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the shaft angle for opposite hand of helix if helix angle of two gears are 20⁰ and 17⁰.
If the 'Mercury planet' is called 'Uranus planet', 'Uranus planet' is called 'Jupiter planet', 'Jupiter planet' is called 'Mars planet', 'Mars planet' is called 'Earth planet', 'Earth planet' is called 'Saturn planet', 'Saturn planet' is called 'Venus planet', and 'Venus planet' is called 'Pluto planet', then on which planet do we live?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
There is only one rail track between stations A and B on a railway line. One hour after the northbound superfast train N leaves station A for station B, the southbound passenger train S reaches station A from station B. The speed of superfast train is twice that of express train E, while the speed of passenger train S is half of that of train E. On some one day train N leaves from station A to station B 20 minutes late than its usual schedule. Both Train N and Train S have increased their speed to maintain the schedule as per the table. If the superfast train doubles its speed, then what should be the ratio (approximately) of the speed of the passenger train to the speed of the superfast train so that the passenger train reaches the station on that day at the exact scheduled time.
A fixed gear having 100 teeth meshes with another gear having 25 teeth, the centre lines of both the gears being joined by an arm so as to form an epicyclic gear train. The number of rotations made by the smaller gear for one rotation of the arm is
A fixed gear having 200 teeth is in mesh with another gear having 50 teeth. The two gears are connected by an arm. The number of turns made by the smaller gear for one revolution of arm about the centre of bigger gear is
Which of the following statements about the movement of planets is true? A. A planet's orbit is elliptical with the Sun at one of two focal points. B. The orbit of a planet is circular with the sun in the center. C. The orbit of a planet is elliptical with another planet in one of the two center-points. D. The orbit of a planet is circular with another planet in the center. 
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the tangential gear tooth force. Module of the gear is 5mm.