Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following milling process is used for machining of a number of flat horizontal and vertical surfaces simultaneously using more than two cutters at the same time mounted on common arbor?

Which of the following milling process is used for machining of a number of flat horizontal and vertical surfaces simultaneously using more than two cutters at the same time mounted on common arbor? Correct Answer Gang milling

Gang milling uses multiple cutters. All the cutter works simultaneously during the milling operation.

Related Questions

A milling operation which involves the use of a combination of more than two cutters, mounted on a common rotor for milling a number of flat and vertical surfaces of a work-piece simultaneously is called
Consider the following statements regarding milling machine: 1. In the vertical milling machine, it Is possible to machine dovetail recesses. 2. In universal milling machine, the worktable can be swivelled. 3. In rotary milling machine, motion imparted to work is rotary. 4. Planer milling machine is provided with several horizontal and vertical heads. Which of the above statements are correct?
In a milling operation, two side milling cutters are mounted with a desired distance between them so that both sides of a workpiece can be milled simultaneously. This set up is called
Six flats A, B, C, D, E and F are located in two rows of three flats each. The flats in both the rows face each other. Flat D is diagonally opposite to flat C. Flat E is opposite to flat F, which is north facing. Flat C is 2nd to the left of A and both of flats are south facing. Which of the following flats is facing flat B?
Two statements are followed by three conclusions numbered I, II and III. Assuming the statements to be true, even if they do not conform to real-world knowledge, decide which of the conclusion(s) logically follows/follow from the statements. Statements: All knives are instruments. Some cutters are knives. Conclusions: I. Some cutters are instruments. II. All knives are cutters. III. Some knives are not instruments.
A semicircular disc rests on a horizontal surface with its top flat surface horizontal and circular portion touching down. The coefficient of friction between semi circular disc and horizontal surface is µ. This disc is to be pulled by a horizontal force applied at one edge and it always remains horizontal. When the disc is about to start moving, its top horizontal force will
A semi-circular disc rests on a horizontal surface with its top flat surface horizontal and circular portion touching down. The coefficient of friction between semi-cricular disc and horizontal surface is i. This disc is to be pulled by a horizontal force applied at one edge and it always remains horizontal. When the disc is about to start moving, its top horizontal force will
Paddy transplantation in Punjab is a very hard labor-intensive back-breaking job. In the transplant season, teams of special people swarm the entire rural landscape employed by the farmers and can be seen laboring away in the fields under the hot sweltering sun. Farmer Jagtar Singh has a full-time help at his sprawling farm who goes by the name of Hari, and who hails from Allahabad, UP. During the paddy transplant season, it is up to Hari to rope in his brothers, sons, and cousins from his native village to complete the task well in time. All his people are skillful and masters of the trade and equally efficient at their jobs. So, this past season, this is how the work went. Hari started the work and after 't' hours was joined in by his brother Jaggi. After another 't' hours, Neelu, their cousin, also jumped into the fray. So, after every 't' hours, 1 person kept on joining the team of already working men, and this process kept on continuing till the completion of the work. The last person worked for 't' hours. In the last season, the very same men had completed the same work working 2 shifts of 12 hours all of them working simultaneously owing to some peculiar weather conditions and time constraints. Jagtar Singh is a fair and just paymaster which is why he faces no labor shortage at this crucial time and which is why the whole 'Hari clan' are more than happy to work for him and are at his beck and call. He pays each of them individually proportional to the work done by them. This time around, Hari received 11 times as much as Surinder, his eldest son, who was the last person to join in. In how much time was the work completed?
A CNC vertical milling machine has to cut a straight slot of 10 mm width and 2 mm depth by a cutter of 10 mm diameter between points (0,0) and (100,100) on the XY plane (dimensions in mm). The feed rate used for milling is 50 mm/min, milling time for the slot (in seconds) is
Each of the question below consists of a question and three statements number I, II and III given below it. You have to decide whether the data provided in the statement are sufficient to answer the question. If the bus is travelling from Surat to Ahmadabad and a car is travelling from Ahmadabad to Surat, then what is the distance between Surat and Ahmadabad? I. The speed of a car is 40% less than the speed of bus. Bus started at 9 am and car started at 10 am and they meet at 3 pm of the same day. II. After travelling for 1 hour, because of traffic average speed of bus is decreased by 20% and covers distance between Surat to Ahmadabad in 11 hours. Original speed of car is 20% less than original speed of bus and before crossing bus it covered 200 km if starts 1 hour later than bus. After crossing car, bus covers remaining distance in 5 hours. III. Speed of bus is 10 km/hr more than the speed of car and before crossing car ratio of distances covered bus and car in same time was 5 : 4. Time taken by car to cover the distance between Ahmadabad and Surat is 2 hours 15 minutes more than time taken by bus to cover the same distance.