In _____________ a high volume flow of the cutting fluid is generally applied on the back of the chip.

In _____________ a high volume flow of the cutting fluid is generally applied on the back of the chip. Correct Answer flooding

In flooding, a high volume flow of the cutting fluid is generally applied on the back of the chip while in a jet application the cutting fluid, which may be either a liquid or a gas is applied in the form of a fine jet under pressure.
Bissoy MCQ

Related Questions

Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation?
1. Fluid flow is frictionless & irrotational
2. Fluid flow is steady
3. Fluid flow is uniform & turbulent
4. Fluid is compressible
5. Fluid is incompressible
In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffected with the changed cutting conditions, the actual chip thickness will be
Chip flow velocity during machining process is 0.2m/s with chip thickness ratio of 0.6. What is the value of cutting velocity?
Chip flow velocity during machining process is 1.2m/s with chip thickness ratio of 0.6. What is the value of cutting velocity?
For turbulent flow (NRe > 2100) of low viscosity fluid (μ > 20cp) in steel pipes, the optimum inside pipe diameter is given by (where, Q = fluid flow rate, ft3/sec.ρ = fluid density, lb/ft3.μ = fluid viscosity, centipoise Di = optimum inside pipe diameter, inches)
The ratio between transmitter chip clock rate and the difference between the transmitter chip clock and difference between transmitter and receiver chip clock rates is called ___________
If t1 denotes the uncut chip thickness and t2 denotes cut chip thickness ratio then, which of the following equation is correct about chip thickness ratio ‘r’?
Small-scale integration, abbreviated _____ refers to fewer than 12 gates on the same chip. Medium-scale integration (MSI) means 12 to 100 gates per chip. And large-scale integration (LSI) refers to more than _____ gates per chip.
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image