Bissoy.com
Doctors Medicines MCQs Q&A

Calculate the volume of the aeration tank required for the following data: Flow: 800 m3/d BOD: 1000 mg/L F/M ratio: 0.15(extended aeration) MLSS : 3500 mg/L

Calculate the volume of the aeration tank required for the following data: Flow: 800 m3/d BOD: 1000 mg/L F/M ratio: 0.15(extended aeration) MLSS : 3500 mg/L Correct Answer High sludge volume index

Readily biodegradable COD if it is high in the influent, then the sludge volume index will be very high. Also this high level of COD would contribute to the floc formation. This also results in higher oxygen demand.

Related Questions

Calculate the volume of the aeration tank required for the following data: Flow: 800 m3/d BOD: 1000 mg/L F/M ratio: 0.15(extended aeration) MLSS: 3500 mg/L
Three pipes x, y and z can fill a tank A can fill it in 4 minutes. Two pipes p and q are connected to tank B. how much time does it take for both tanks to run at the full capacity? Ratio of time taken to fill tank A by P and time taken by x to fill tank A is 2: 1 and ratio of time taken by Q to fill tank B and Z to fill tank A is 5: 3. Pipe P is 20% more efficient then pipe Q. and pipe Y takes 12 minutes to fill the tank. Capacity of tank B is 3/4 times of tank A. Note: Tank B is to be filled only after filling tank A. Valves of pipe p and q are closed once tank B is running at full capacity.
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank.
Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
Consider the following statements regarding contact stabilization process: 1. Primary settling tank is not required in some cases. 2. BOD removal occurs in two stages. 3. Aeration volume requirements are approximately 50% of those of a conventional – or tapered – aeration plant. 4. Returned sludge is aerated for 30 min to 90 min in sludge aeration tank. Which of the above statements are correct?
A tank has an optional adjustable outlet pipe that can be attached to the tank at any height we want. This outlet pipe drains water from the tank at a constant rate, while the tank is being filled using another inlet pipe at a constant rate. If the outlet, pipe is attached at half the height of the tank, the tank, which is initially empty gets filled in 18 hours. If the outlet pipe is attached at height equal to two third height of the tank, the tank, which is initially empty, is filled in 16 hours. In how many hours will the tank, which is initially empty, be completely filled if the outlet pipe is not attached to the tank?
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: There are two inlet pipes A, B and two outlet pipes C, D inlet pipe B takes 7 hours more to fill the tank when compared to A. Two outlet pipes when working together can empty the tank in 3.5 hours and efficiency of both the pipe is same if all of them working together can fill the tank in 2 hours. Calculate the time taken by A to fill the tank. Quantity B: The ratio of efficiencies of two pipes A and B is in the ratio 3 ∶ 2 and that of pipe B and C is 1 ∶ 3. Pipe A and B are inlet pipes, pipe C is outlet pipe working together they can fill the tank in 7.5 hours. Calculate the time taken by A to fill the tank when working alone.
Calculate the BOD load for the following data. Flow: 800 m3/d BOD load: 1000 mg/L
The question below is followed by three statements I, II, and III. You have to determine whether the data given is sufficient for answering the question. You should use the data and your knowledge of mathematics to choose the best possible answer. A water tank is to be filled. Pipe A is opened for 10 minutes and then closed. After that pipe, B is opened and the remaining tank is filled by Pipe B alone. In how much time pipe B filled the remaining tank working alone? I. Pipe A and B together can fill a tank in 12 minutes. II. Pipe B, C, can fill a tank in 10 minutes. The ratio of their efficiency is 1 : 2 III. Pipe D and C can fill a tank in 12 minutes