Bissoy.com
Doctors Medicines MCQs Q&A

Calculate the flow rate of the backwash pump to be used for a multimedia filter with the following data. Flowrate: 2200 m3/h Rise velocity of multimedia filter: 18 m/h

Calculate the flow rate of the backwash pump to be used for a multimedia filter with the following data. Flowrate: 2200 m3/h Rise velocity of multimedia filter: 18 m/h Correct Answer 2900 m3/ h

First the area of the filter is found out. Area = 2200/18=122 m2. Then by multiplying area x the velocity of the backwash pump assumed we derive at the flowrate. Flowrate= 122 m2 x 24 m/h = 2900 m3/h.

Related Questions

Calculate the flow rate of the backwash pump to be used for a pressure sand filter with the following data. Flowrate: 2200 m3/h Rise velocity of PSF (Pressure Sand filter): 10 m/h
Calculate the flow rate of the backwash pump to be used for a dual media filter with the following data. Flowrate: 2200 m3/h Rise velocity of DMF: 15 m/h
Calculate the flow of backwash pump required for the activated carbon filter for the following details. Flow: 2500 m3/h. Rise Velocity: 15m/h Backwash pump velocity: 24 m/h
Calculate the backwash pump required for the activated carbon filter for the following details. Flow: 1000 m3/h. Rise Velocity: 15m/h
Calculate the diameter of a multimedia filter with the following data. Flow: 2200 m3/hr Velocity: 18 m/hr
Calculate the backwash water volume for the activated carbon filter for the following details. Net Flow: 3000 m3/h. Rise Velocity: 15m/h
A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
What is the mole balance of a component in a CSTR? (Where F0 is the molar flowrate of reactant entering and F is the exit molar flowrate)
Which of the following statements are true?
Statement I Big data refers to no precise quantity, but generally refers to data in the range of Petabytes and Exabyte, i.e. billions to trillions of records, all from various sources. Big data is generated much faster. than traditional data in much larger quantities.
Statement II Big data interests industries because they are able to learn more patterns and curious variances than smaller data sets, with the capability to provide valuable insights into consumer behaviour, weather systems, financial market activity, or other phenomena.
Statement III Various departments and product lines use various applications within most organisations and store data in separate datasets. These separate databases may contain similar data, but data from one data base to another is not always consistent. This is called data silo.
A, B and C are three small pumps fitted to a tank. D is a large pump fitted to the tank. Pump B is 25% more efficient than A. Pump C is 20% more efficient than B. Pump D is 4/3rd efficient of pump C. All of the pumps are used to fill the tank. What is the ratio of the time taken by pumps A and B to fill the tank together to the time taken by the pumps B and D to fill the tank together?