Bissoy.com
Doctors Medicines MCQs Q&A

The two types of pulleys in a hydraulic lift are ______ and ______

The two types of pulleys in a hydraulic lift are ______ and ______ Correct Answer movable, fixed

The two types of pulleys available are fixed pulley and movable pulley. The one end of both the pulleys is connected to the sliding ram. The other end of the pulleys is connected to the fixed cylinder.

Related Questions

Which one is incorrect? 1. Kumabaram Lift Canal-Older name - Nohar Sohwa Lift Canal. 2. Kawar sen Lift Canal-Older name - Lunaksar Lift Canal. 3. Panna Lal Lift Canal - Older name - Gajner Lift canal. 4. Veer Tejaji Lift Canal-Older name - Bagdsar.
Two pulleys are connected by a belt. The sum of the diameter of two pulleys is 90 cm and while the one makes 50 rpm, the other makes 20 revolutions. What will be the diameter of the pulleys?
Two pulleys are connected by a belt. The sum of the diameters of the pulleys is 92.6 cm and while one makes 50 rev/min the other make 200 rev/min. What will be the diameter of the pulleys?
There are two lifts A and B in a mall and angle of elevation made by person in lift A to the person in lift B is 45°. When lift A moves 2 m upwards and lift B moves 1 m downwards, then angle of elevation changes to 30°, then find the horizontal distance between two lifts. (Take √3 = 1.7)
P. A weir is a hydraulic structure where majority or the entire ponding is achieved by a raised crest and smaller part or nil part by the shutters. Q. A weir is a hydraulic structure that is made by constructing the width of the channel only. R. A barrage is a hydraulic structure that is made by creating a choking condition only. S. A barrage is a hydraulic structure where majority or the entire ponding is achieved by a shutter and smaller part or nil part by the raised crest. Identify the correct statements in the above.
When two pulleys are connected by means of a cross belt drive, then both the pulleys will rotate in _________ directions.
The steel pulleys are __________ in weight than cast iron pulleys of the same capacity.
If the number of pulleys in a system is equal to its velocity ratio, then it is a __________ system of pulleys.
The velocity ratio for the first system of pulleys is (where n is the number of pulleys.)
Five pulleys are arranged in the second system of pulleys. When not loaded the effort required to raise the movable block is 35N. Further wastage in friction increases the pull at the rate of 3% of the load lifted. What is the effort required to raise a load of 2kN?