Bissoy.com
Doctors Medicines MCQs Q&A

The velocity of the flow at the inlet of Kaplan turbine is V. In an experimental setup, what could be the possible value of the velocity of the flow at the outlet of Kaplan turbine?

The velocity of the flow at the inlet of Kaplan turbine is V. In an experimental setup, what could be the possible value of the velocity of the flow at the outlet of Kaplan turbine? Correct Answer 0.8V

The flow velocity of turbine at the outlet of the Kaplan turbine will be lesser than that of the inlet due to effects of friction in the blade. Hence, practically a lower value would be obtained. 0.8V is the only option lower than V.

Related Questions

Which of the following statement(s) is/are incorrect? (i) A turbine is called an impulse turbine if at the inlet of the turbine total energy is only kinetic energy (ii) A turbine is called a reaction turbine if at the inlet of the turbine the total energy is kinetic energy and pressure energy (iii) The inward flow reaction turbine having radial discharge at the outlet is known as Kaplan turbine
In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
A tank has an inlet pipe and an outlet pipe. If the outlet pipe is closed then the inlet pipe fills the empty tank in 8 hours. If the outlet pipe is open then the inlet pipe fills the empty tank in 10 hours. If only the outlet pipe is open then in how many hours the full tank becomes half-full?
Consider the following statements in connection with hydraulic turbines: 1. The Kaplan turbine is a radial flow turbine in which the guide vane angles as well as the runner vane angles are adjustable. 2. Francis and Kaplan turbines are provided with draft tubes which carry water from exit of runner to tail water to increase the gross head across the turbine. 3. The parts of turbines susceptible to cavitation are the guide vanes and runner vanes – drastically reducing the turbine efficiency. 4. The specific speed of a 4-jet Pelton turbine will be 28 if the specific speed of a single-jet Pelton turbine is 14. Which of the above statements are correct?
A tank has an optional adjustable outlet pipe that can be attached to the tank at any height we want. This outlet pipe drains water from the tank at a constant rate, while the tank is being filled using another inlet pipe at a constant rate. If the outlet, pipe is attached at half the height of the tank, the tank, which is initially empty gets filled in 18 hours. If the outlet pipe is attached at height equal to two third height of the tank, the tank, which is initially empty, is filled in 16 hours. In how many hours will the tank, which is initially empty, be completely filled if the outlet pipe is not attached to the tank?
A cistern is fitted with many inlets and outlet taps. All inlet taps fill the cistern at the same rate and outlet taps empty the cistern at the same rate. The empty cistern gets filled in 10 hours when 9 inlet and 5 outlet taps are opened. It takes 30 hours when 6 inlets and 5 outlets are opened. How much time does it take for the empty cistern to completely get filled if 2 inlets and 2 outlet taps are opened?
The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: There are two inlet pipes A, B and two outlet pipes C, D inlet pipe B takes 7 hours more to fill the tank when compared to A. Two outlet pipes when working together can empty the tank in 3.5 hours and efficiency of both the pipe is same if all of them working together can fill the tank in 2 hours. Calculate the time taken by A to fill the tank. Quantity B: The ratio of efficiencies of two pipes A and B is in the ratio 3 ∶ 2 and that of pipe B and C is 1 ∶ 3. Pipe A and B are inlet pipes, pipe C is outlet pipe working together they can fill the tank in 7.5 hours. Calculate the time taken by A to fill the tank when working alone.
There are 12 taps fitted to a cistern in which some are inlet taps and rest are outlet taps. Each inlet tap can fill the cistern in 18 hours and each outlet tap can empty the cistern in 24 hours. Find the difference between the number of inlet and outlet taps, if all the pipes when opened, 1/4th of cistern gets filled in 3 hours.
The following questions have three statements. Study the question and the statements and decide which of the statement(s) is/are necessary to answer the question. In how many hours tap B can fill the completely empty tank? Statement I: The inlet tap A and the outlet tap C working simultaneously takes 40 hours to fill the tank. Statement II: Efficiency of inlet tap B is equal to efficiency of outlet tap C or 62.5% of the efficiency of inlet tap A. Statement III: The outlet tap C can empty a half filled tank in 12 hours.