Bissoy.com
Doctors Medicines MCQs Q&A

The effective length of intermediate transverse stiffener is taken as

The effective length of intermediate transverse stiffener is taken as Correct Answer 0.5 times the length of stiffener

The effective length of intermediate transverse stiffener is taken as 0.7 times the length of stiffener. The intermediate transverse stiffener is provided mainly to improve shear buckling resistance of the web.

Related Questions

As per IS 800 ∶ 2007, in the design of beams/plate girders, when the web of a member acting alone is inadequate, different types of stiffeners are provided. Match the type of stiffeners provided in List I with the requirement to be satisfied by them in List 2. (Use the Code in the lists for matching). List 1 List 2 B. Intermediate transverse web stiffener 1. Provide local reinforcement to web under shear and bearing. C. Load carrying stiffener 2. Improve the buckling strength of a slender web due to shear. D. Bearing stiffener 3. Prevent local buckling of web due to concentrated loading. E. Diagonal stiffener 4. Prevent local crushing of web due to concentrated loading
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
In a survey of 25 students, it was found that 15 had taken Mathematics, 12 had taken Physics and 11 had taken Chemistry, 5 had taken Mathematics and Chemistry, 9 had taken Mathematics and Physics, 4 had taken Physics and Chemistry and 3 had taken all the three subjects. Find the number of students who had taken both Physics and Chemistry but not Mathematics.
In a survey of university students, 64 had taken Drama course, 94 had taken Dance course, 58 had taken a Singing course, 28 had taken Drama and singing course, 26 had taken Drama and dance course, 22 had taken Dance and singing course, and 14 had taken all the three courses. Find how many have taken only one course?
The connection of intermediate vertical stiffeners to the web, not subjected to external loads, shall be designed for a minimum shear force (kN/m) of(where, t = the web thickness in mm h = the outstand of stiffener in mm)
The connection of intermediate vertical stiffeners to the web, not subjected to external loads, shall be designed for a minimum shear force (kN/m) of
(where, t = the web thickness in mm h = the outstand of stiffener in mm)
Select the correct differences between char and varchar data types? i. varchar is non unicode and char is unicode character data type ii. char is ‘n’ bytes whereas varchar is actual length in bytes of data entered in terms of storage size iii. varchar is variable in length and char is the fixed length string iv. For varchar, if a string is less than the maximum length then it is stored in verbatim without any extra characters while for char if a string is less than the set length it is padded with extra characters to equalize its length to given length
A fillet-welded joint is subjected to transverse loading F as shown in the figure. Both legs of the fillets are of 10 mm size and the weld length is 30 mm. If the allowable shear stress of the weld is 94 MPa, considering the minimum throat area of the weld, the maximum allowable transverse load per weld in kN is
Consider the following statements: In a plate girder 1. Bearing stiffeners are designed for bearing forces and they must also be checked for safety against compressive forces. 2. The length of any staggered intermittent fillet weld should not be less than 10 times the thickness of the stiffener. 3. Bearing stiffeners must be provided at the point of maximum bending moment. Which of the above statements are correct?
Consider a full binary tree with n internal nodes, internal path length i, and external path length e. The internal path length of a full binary tree is the sum, taken over all nodes of the tree, of the depth of each node. Similarly, the external path length is the sum, taken over all leaves of the tree, of the depth of each leaf. Which of the following is correct for the full binary tree?