Bissoy.com
Doctors Medicines MCQs Q&A

Compressive strength in lacing bars in single lacing system is equal to

Compressive strength in lacing bars in single lacing system is equal to Correct Answer (Vt /N) cosecΘ

Compressive strength in lacing bars is equal to (Vt /N) cosecΘ for single lacing system and (Vt/2N) cosecΘ for double lacing system, where N = number of shear resisting elements.

Related Questions

Consider the following statements for the design of a laced column: 1) In a bolted construction, the minimum width of the lacing bar shall be three times the nominal diameter of the end bolt. 2) The thickness of the flat of a single lacing system shall be not less than one-fortieth of its effective length 3) The angle of inclination of the lacing bar should be less than 40° with the axis of the built-up column 4) The lacing shall be designed for a transverse shear of 2.5% of the axial load on the column Which of the above statements are correct?
Connie has a number of gold bars, all of different weights. She gives the 24 lightest bars, which weigh 45% of the total weight, to Brennan. She gives the 13 heaviest bars, which weigh 26% of the total weight, to Maya. She gives the rest of the bars to Blair. How many bars did Blair receive?
Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength
Compared to mild steel, cast iron has
(i) High compressive strength
(ii) High tensile strength
(iii) Low compressive strength
(iv) Low tensile strength
If the 20 mm rivets are used in lacing bars, then the minimum width of lacing bar should be
Given below are six sentences, four of which, are jumbled. Pick the option that gives their connect order. Sentence 1. The British love chocolate. P. In fact, they spend more on chocolate than any other European country! Q. There is milk chocolate, dark chocolate and white chocolate. R. If you go to any newsagent’s shop in the UK you’ll see a huge selection of chocolate bars on sale. S. There are small bars of chocolate, medium-sized bars and massive bars of chocolate. Sentence 6. You can buy mint-flavoured chocolate, chocolate-covered peanuts or raisins, chocolate with nuts, chocolate with toffee … the list is endless!
What should be the minimum inclined angle to the axis of the member for lacing bars in single or double system?
Consider the following: The parallel fillet welded joint is designed for 1) tensile strength 2) compressive strength 3) bending strength 4) shear strength Which of the above is/are correct?
A construction firm has decided to use burnt clay bricks of class 20 and above (as per IS 1077 : 1992) for the construction of a residential complex. The table below gives the details of Samples with Id (S1, S2, S3, S4, and S5) taken from five different suppliers. The criteria to be adopted are the percentage of water absorption and average compressive strength of bricks corresponding to bricks of class 20 and above. Select the Id of the samples which can be recommended for use in brick wall construction. Id Water absorption (%) Average compressive strength (kN/m2) S1 18 17500 S2 20 21000 S3 12 20000 S4 10 14000 S5 15 27000
What is the approximate ratio of 7 days compressive strength to 28 days compressive strength of cement concrete?