Bissoy.com
Doctors Medicines MCQs Q&A

In a lap joint, at least __________ bolts should be provided in a line.

In a lap joint, at least __________ bolts should be provided in a line. Correct Answer 2

In lap joint, members to be connected are simply overlapped and connected together by means of bolts and welds. To minimize the effect of bending due to eccentricity in a lap joint, at least two bolts in a line should be provided.

Related Questions

The structure shown is subjected to an eccentric force P=5kN and eccentricity=500mm. The horizontal distance between two bolts is 200mm and vertical distance between bolts is 150mm. The yield strength of bolts is 400N/mm² and factor of safety is 3. Determine the size of the bolts.
In a lap joint, if the plates are connected to each other when the joint is made with only one row of rivets then it is called double-riveted lap joint.
Following are the conditions to select a manager for accounts in a company: 1, The candidate must be at least 30 years and not more than 40 years as on 1st January 2019. 2. Be a commerce graduate with at least 55% aggregate marks 3. Have experience of at least 10 years of accounts experience out of which at least 3 years in a managerial position in an organization. 4, Have secured at least 60% in the recruitment process. At 2 above. but has secured at least 50% aggregate marks in graduation and has secured 80% in there cruitment process, he can be referred to VP-accounts. In each question below the candidate details are provided. Read the question and answer based on the information provided. Don’t assume anything. Ram is born on 1 August 1974 and has a 60% aggregate in graduation -he has 15 years" experience in an organization with 5 years as accounts manager.
Ryan works in a company that follows TQM and produces nuts and bolts. The company has not moved much from its old design of nuts and bolts. Ryan’s creativity leads him to a better and effective design of nuts and bolts at the same production cost as before. It can increase the productivity without compromising quality. Should the company implement Ryan’s design?
Two horses A and B run at a speed of 3 : 2 ratio in the first lap, during the second lap the ratio differs by 4 : 7, during the third lap the ration differs by 8 : 9. What is the difference in ratio of speed altogether between the two horses.
Machine A produces bolts at a uniform rate of 120 every 40 seconds and Machine B produces bolts at a uniform rate of 100 every 20 seconds. If the two machines run simultaneously , how many seconds will it take for them to produce a total of 200 bolts.
Machine A produces bolts at a uniform rate of 120 every 40 seconds, and Machine B produces bolts at a uniform rate of 100 every 20 seconds. If the two machines run simultaneously, how many seconds will it take for them to produce total of 200 bolts?
Consider the following statements regarding the ends of the pressure vessels flanged by pre-tensioned bolts: 1. Pre-tensioning helps to seal the pressure vessel. 2. Pre-tensioning reduces the maximum tensile stress in the bolts. 3. Pre-tensioning countermands the fatigue life of the bolts. 4. Pre-tensioning helps to reduce the deleterious effect of pressure pulsations in the pressure vessel. Which of the above statements are correct?
The structure shown is subjected to an eccentric force P=5kN and eccentricity=500mm. The horizontal distance between two bolts is 200mm and vertical distance between bolts is 150mm. The yield strength of bolts is 400N/mm² and factor of safety is 3. Determine the primary shear force from the following figure.
The structure shown is subjected to an eccentric force P=5kN and eccentricity=500mm. The horizontal distance between two bolts is 200mm and vertical distance between bolts is 150mm. The yield strength of bolts is 400N/mm² and factor of safety is 3. Determine the secondary shear force in the below figure.