Bissoy.com
Doctors Medicines MCQs Q&A

In a lap joint, if the plates are connected to each other when the joint is made with only one row of rivets then it is called double-riveted lap joint.

In a lap joint, if the plates are connected to each other when the joint is made with only one row of rivets then it is called double-riveted lap joint. Correct Answer False

For a lap joint, if the plates are made to connect using only one row of rivets then it is called single-riveted lap joint. A joint is said to be double-riveted, triple riveted etc. accordingly to the number of rows of rivets in it.

Related Questions

Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². If width of plate=80mm and diameter of rivets 10mm, then pitch will be?
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivets along B-B.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivets along C-C.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the pitch of the rivets.
There are two rows, each containing 3 numbers. Below are some rules to be used to get the resultant number for each row separately. Use the rule from left to right for each row and find the answer to the question. Rule: 1. If an even number is followed by an even number, then the first number will be subtracted from the second. 2. If an odd number is followed by an odd number, then both will be added. 3. If an odd number is followed by an even number, then the even number will be subtracted from the square of the odd number. 4. If an even number is followed by an odd number, then the odd number will be subtracted from the even number. Row I: 9,11, 34 Row II: 16, 9, 8 What is the difference between the resultant numbers in the first row and the second row
According to I.B.R., the distance between the rows of rivets, for equal number of rivets in more than one row for lap joint or butt joint (chain riveting) shall not be less than
If the rivets in adjacent rows are staggered and the outermost row has only one rivets, the arrangement of the rivets is called
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it.
Ants have been living on the earth for more than 100 million years and can be found almost anywhere on the planet. It is estimated that there are about 20000 different species of ants. For this reason ants have been called Earth's most successful species. If you watch ants for any length of time you will see that they really do communicate with each other and very effectively too. Ants communicate by touching each other with their antennae. Ants also use chemicals called pheromones to leave scent trails for other ants to follow. Ants build many different types of homes. Many ants build simple little mounds out of dirt or sand. Other ants use small sticks mixed with dirt and sand to make a stronger mound that offers protection from rain. Western Harvester ants make a small mound on top, but then tunnels up to 15 feet straight down to hibernate during winter. Ant mounds consist of many chambers connected by tunnels. Different chambers are used for nurseries, food storage, and resting places for the worker ants. Some ants live in wood like termites. Army ants don't make a home at all but travel in a large groups searching for food. Ants are social insects which means they live in large colonies or groups. Some colonies consist of millions of ants. There are three types of ants in each species, the queen, the sterile female workers and males. The male ants only serve one purpose, to mate with future queen ants and do not live very long. The queen grows to adulthood, mates, and then spends rest of her life laying eggs. A colony may have only one queen, or there may be many queens depending on the species. Ants go through four stages of development: egg, larva, pupa and adult.
Why are ants called the 'Earth's' most successful species?
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.