Bissoy.com
Doctors Medicines MCQs Q&A

In what intervals the top width of the notch lies?

In what intervals the top width of the notch lies? Correct Answer 3/4 to full water depth

Generally the number of notches is adjusted by hit and trial method. The width of the notch lies between 3/4 to full water depth above the sill of the notch.

Related Questions

Consider the following statements in respect of class intervals of grouped frequency distribution: 1. Class intervals need not be mutually exclusive. 2. Class intervals should be exhaustive. 3. Class intervals need not be of equal width. Which of the above statements are correct? 
The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch)
The discharge over a rectangular notch is (where b = Width of notch and H = Height of liquid, above the sill of the notch)
The discharge over the trapezoidal notch is equal to the discharge over the rectangular notch __________ the discharge over the triangular notch.
The width carriageway required will depend on the intensity and volume of traffic anticipated to use the bridge. a. Except on minor village roads all bridges must provide for at least two-lane width b. The minimum width of the carriageway is 4.25 m for a one-lane bridge c. The minimum width of the carriageway is 3.75 m for a one-lane bridge d. The minimum width of the carriageway is 7.5 m for a two-lane bridge Which of the following statement(s) given above is/are incorrect.
A steel plate is subjected to tension. The tensile force is applied over a width 'a' whereas the gross width of the plate is 'b'. The dispersion of the force from the point of application is at about 30° with the axis and extends to a maximum width of 12 times the thickness t of the plate. The effective width which comes into action will be
The discharge over a right angled notch is (where H = Height of liquid above the apex of notch)
Which of the following is correct regarding the Charpy toughness test: P. The sample is held vertically as cantilever beam. Q. The sample is held horizontally as simply supported beam. R. The Notch in the sample faces the striking hammer. S. The Notch in the sample is opposite to the striking hammer.
The ratio of ______ the notch filter to the ____ the notch filter gives the Noise Power Ratio.
Find the discharge of water flowing over a rectangular notch of 1.5 m length when the constant head over the notch is 275 mm. Take Cd = .60