Bissoy.com
Doctors Medicines MCQs Q&A

A beaker of height 15 cm is completely filled with water. Now two-third of the liquid is taken out and an equal amount of two other immiscible liquids of specific gravities 0.8 and 1.2 are poured into the tank. What will be the pressure (in kP

A beaker of height 15 cm is completely filled with water. Now two-third of the liquid is taken out and an equal amount of two other immiscible liquids of specific gravities 0.8 and 1.2 are poured into the tank. What will be the pressure (in kP Correct Answer 637.65

PA = 0.8 * 103 * 9.81 * 0.05 + 1 * 103 * 9.81 * 0.025 = 637.65 kPa.

Related Questions

A tank of height 3 m is completely filled with water. Now two-third of the liquid is taken out and an equal amount of two other immiscible liquids of specific gravities 0.8 and 1.2 are poured into the tank. By what percent will the pressure at the base of the tank change?
A tank has an optional adjustable outlet pipe that can be attached to the tank at any height we want. This outlet pipe drains water from the tank at a constant rate, while the tank is being filled using another inlet pipe at a constant rate. If the outlet, pipe is attached at half the height of the tank, the tank, which is initially empty gets filled in 18 hours. If the outlet pipe is attached at height equal to two third height of the tank, the tank, which is initially empty, is filled in 16 hours. In how many hours will the tank, which is initially empty, be completely filled if the outlet pipe is not attached to the tank?
Sumit takes out water in a beaker from a bucket for an experiment. He puts the thermometer in the water in beaker and notes the reading as 35°C. Which of the following conclusions drawn by him are correct? A. The temperature of water in beaker and bucket are almost same. B. The heat in water in beaker and bucket are same C. The temperature of water in beaker is less than the temperature of water in bucket. D. The heat in water in bucket is more than the heat in water in beaker
A beaker of height 30 cm is filled with water (Sw = 1) up to a height of 10 cm. Now oil (So = 0:9) is poured into the beaker till it is completely filled. At what distance (in cm) from the base will the pressure be one-third the pressure at the base of the beaker?
Three pipes x, y and z can fill a tank A can fill it in 4 minutes. Two pipes p and q are connected to tank B. how much time does it take for both tanks to run at the full capacity? Ratio of time taken to fill tank A by P and time taken by x to fill tank A is 2: 1 and ratio of time taken by Q to fill tank B and Z to fill tank A is 5: 3. Pipe P is 20% more efficient then pipe Q. and pipe Y takes 12 minutes to fill the tank. Capacity of tank B is 3/4 times of tank A. Note: Tank B is to be filled only after filling tank A. Valves of pipe p and q are closed once tank B is running at full capacity.
A beaker of height h is completely filled with water. Now two-third of the liquid is replaced by another liquid. If the pressure at the base of the beaker doubled, what is the specific gravity of the liquid poured?
Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
There are two beakers with the first containing sodium hydroxide solution and the other beaker has twice the quantity of water. To prepare a solution, 60 ml of sodium hydroxide is added to the water beaker. Three fourth of the prepared solution is again added to the first beaker. After this the first beaker has 3.5 times the solution in the water beaker. How much was the initial amount of sodium hydroxide?
A beaker is filled with a liquid of density ρ1 up to a certain height. The pressure at the base of the beaker id Pb. If the liquid is replaced by an equal volume of another liquid of density ρ2, what will be the pressure at the base of the beaker now?
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank