Bissoy.com
Doctors Medicines MCQs Q&A

Atomization of fuel can be done in how many ways?

Atomization of fuel can be done in how many ways? Correct Answer 2

Atomization of fuel can be done by (i) Air blast (ii) Pressure spray. In the olden days engines used air fuel injection at about 70bar which is sufficient not only to inject the oil, but also to atomize it for rapid and thorough combustion. The expense of providing an air compressor tank leads to the development of “solid” injection.

Related Questions

A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
With reference to 'fuel cells' in which hydrogen-rich fuel and oxygen are used to generate electricity, consider the following statements: 1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by-products. 2. Fuel cells can be used for powering buildings and not for small devices like laptop computers. 3. Fuel cells produce electricity in the form of Alternating Current (AC) Which of the statements given above is/are correct?
With reference to 'fuel cells' in which hydrogen rich fuel and oxygen are used to generate electricity. Consider the following statements.
1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by products.
2. Fuel cells can be used for powering buildings and not for small devices like laptop, computers.
3. Fuel cells produce electricity in the form of Alternating Current (AC).
Which of the statements given above is/are correct?
The pie chart given below shows the fuel consumption by five vehicles V1, V2, V3, V4 and V5. In a month total fuel consumption by all five vehicles is 720 litre. Fuel consumption of a particular vehicle is shown in terms of degree with respect to the total fuel consumption by all these five vehicles. J1 = Difference between the fuel consumption of V4 and V5. J2 = Difference between the fuel consumption of V1 and V2. What is the value of J2 – J1?
The question below consists of a set of labelled sentences. Out of the four options given, select the most logical order of the sentences to form a coherent paragraph. P: Inclusion is also about finding different ways of teaching so that classrooms actively involve all children. It also means finding ways to develop friendships, relationships and mutual respect between all children, and between children and teachers in the school. Q: Creativity may mean teachers learning to teach in different ways or designing their lessons so that all children can be involved. R: Inclusive education is about looking at the ways our schools, classrooms, programs and lessons are designed so that all children can participate and learn. S: All children are at all times ready to attend regular schools and classrooms. Their participation is not something that must be earned. Inclusive education is a way of thinking about how to be creative to make our schools a place where all children can participate.
______ is obtained in water atomization compared to gas atomization.
Consider the following statements with reference to fuel cells: 1. In fuel cells, hydrogen-rich fuel and oxygen are used to generate electricity. 2. Fuel cells produce electricity in the form of direct current (DC). 3. Hydrogen fuel cells are more energy-efficient compared to diesel engines. Which of the statements given above is/are correct?
What is minimum amount of air required per m3 of gaseous fuel for complete combustion? m3/m3 of fuel b) 1/100 m3/m3 of fuel c) 1/21 m3/m3 of fuel d) 1/100 m3/m3 of fuel
Determine the corrections or otherwise of the following Assertion and reason : Assertion : Total fuel volume of aircraft is divided into mission or used fuel, reserve fuel and trapped fuel. Reason: Depending on type of aircraft, fuel fraction for each category will be different. and are true and is the correct reason for b) Both and are true but is not the correct reason for c) is true but is false d) is false but is true
Which of the following are essential for a good combustion chamber of turbojet engine? 1. It should allow complete combustion of fuel. 2. It should maintain sufficiently high temperature in the zone of combustion in addition to proper atomization of fuel thus leading to continuous combustion. 3. It should not have high rate of combustion. 4. The pressure drop should be as small as possible