Bissoy.com
Doctors Medicines MCQs Q&A

Suspension type insulator are subjected to ______________

Suspension type insulator are subjected to ______________ Correct Answer tensile stress

Suspension type insulator hangs from the cross arms of the suspending supporting structure. The line conductor is attached to its lower end hence the load of the conductor causes tensile stress on the suspension insulator.

Related Questions

A designer wanted to design the insulator for the underground cable, then the estimation of thickness of the insulator will depend on ______________
In which of the following cases, there exists the situation of Pure Bending in some part of the beam or along the entire beam? i) A simply supported beam subjected to two equally spaced downward concentrated loads ii) A simply supported beam subjected to two equally spaced opposite moments iii) A cantilever beam subjected to clockwise moment at free end iv) An overhanging beam with both side overhangs subjected to different concentrated loads at both the free ends
Consider the following statements regarding suspension cables: 1) The horizontal component of the cable tension in a suspension bridge is constant at every point along the length of the cable 2) Stiffening girders in a suspension bridge carry only the live load Which of the above statements is/are correct?
What type of insulator used at dead ends and on straight lines as suspension type for voltages 3.3 kV and above?
Which of the following insulator is similar to pin type insulator?
Consider the following statements in connection with deflection-type and null-type instruments: 1. Null-type instruments are more accurate than the deflection-type ones. 2. Null-type of instrument can be highly sensitive compared to a deflection-type instrument. 3. Under dynamic conditions, null-type instruments are less preferred to deflection-type instruments. 4. Response is faster in null-type instruments as compared to deflection-type instruments. Which of the above statements are correct?
Pin type insulator are mostly subjected to which type of mechanical stress?
Consider a three-phase. 50 Hz, 11 kV distribution system, Each of the conductors is suspended by an insulator string having two identical porcelain insulators. The self-capacitance of the insulator is 5 times the shunt capacitance between the link and the ground, as shown in the figure. The voltage across the two insulators are
A dielectric is always an insulator. But an insulator is not necessarily a dielectric. State True/False.
Consider the following grammar and the semantic actions to support the inherited type declaration attributes. Let X1, X2, X3, X4, X5 and X6 be the placeholders for the non-terminals D, T, L or L1 in the following table: Production rule Semantic action D → T L X1.type = X2.type T → int T.type = int T → float T.type = float L → L1, id X3.type = X4.type addType(id.entry, X5.type) L → id addType(id.entry, X6.type)   Which one of the following are the appropriate choices for X1, X2, X3 and X4?