Bissoy.com
Doctors Medicines MCQs Q&A

Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75° If a load is connected at receiving end at unity power factor but maintaining the same voltage profile. Will this system now need any type of compensation?

Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75° If a load is connected at receiving end at unity power factor but maintaining the same voltage profile. Will this system now need any type of compensation? Correct Answer Yes

Yes this system will require a compensation system to be employed as the net reactive power will not be zero due to the load mentioned.

Related Questions

Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75° If a load is connected at receiving end at unity power factor but maintaining the same voltage profile. Will this system now need any type of compensation? If so, then which one?
Assume a 275 kV transmission line having the following line constants:A = 0.85∠5° ; B = 200∠75° If a load is connected at receiving end at unity power factor but maintaining the same voltage profile. The receiving end voltage if the compensation equipment is not installed will be __________
Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75° If a load is connected at receiving end at unity power factor but maintaining the same voltage profile. Then _________ compensation will be needed at ______
Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75° For obtaining 275 kV voltage at the receiving end obtaining unity power factor, the power transmitted will be _____________
Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75° For obtaining 275 kV voltage at the receiving end obtaining unity power factor, the power angle required to be set as __________
A single phase 50 hz, generator supplies an inductive load of 5 MW at a power factor of 0.8 lagging using OHTL over 20 km. The resistance and reactance are 0.39Ω and 3.96 Ω. The voltage at receiving station is maintained at 10 KV. The sending end voltage is 11.68 kV. If the voltage regulation is reduced to 50%, then the receiving end current at this operation mode will be _____________
A single phase 50 hz, generator supplies an inductive load of 5 MW at a power factor of 0.8 lagging using OHTL over 20 km. The resistance and reactance are 0.39Ω and 3.96 Ω. The voltage at receiving station is maintained at 10 KV. The sending end voltage is 11.68 kV. The new sending end voltage at the half the voltage regulation is _____________
A single phase load of 100 KVA is delivered at 2000 V over a transmission line having R = 1.4 Ω and X = 0.8 Ω, when the power factor of load is unity, the voltage at sending end is
A single phase 50 hz, generator supplies an inductive load of 5 MW at a power factor of 0.8 lagging using OHTL over 20 km. The resistance and reactance are 0.39Ω and 3.96 Ω. The voltage at receiving station is maintained at 10 KV. The sending end voltage is 11.68 kV. If the voltage regulation is reduced to 50%, then the power factor at this operation mode will be _________________
A single phase 50 hz, generator supplies an inductive load of 5 MW at a power factor of 0.8 lagging using OHTL over 20 km. The resistance and reactance are 0.39Ω and 3.96 Ω. The voltage at receiving station is maintained at 10 KV. The sending end voltage is 11.68 kV. If the voltage regulation is reduced to 50%, then the power factor angle at this operation mode will be _____________