Bissoy.com
Doctors Medicines MCQs Q&A

Speed regulation of a DC shunt motor is equal to 10%, at no load speed of 1400 rpm. What is the full load speed?

Speed regulation of a DC shunt motor is equal to 10%, at no load speed of 1400 rpm. What is the full load speed? Correct Answer 1273 rpm

Speed regulation is equal to 0.1 which is also equal to (no-load – full load speed) divided by full load speed. Thus, by substituting all known quantities we get full load speed = 1400/1.1 = 1272.7 rpm so, speed equal to 1273 rpm.

Related Questions

No load speed of the DC shunt motor is 1322 rpm while full load speed is 1182 rpm. What will be the speed regulation?
Speed regulation of DC shunt motor is calculated by ratio of difference of full load speed and no-load speed with full load speed.
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
A student performs an experiment with a Francis turbine. He accidently set the RPM of Francis turbine to 1400 rpm instead of 700 rpm. He reported the power to be 1 MW. His teacher asks him to perform the same experiment using the correct RPM. The student performs the same experiment again, but this time the erroneously doubled the flow velocity. What does the student report the power to be?
Which of the following statements are correct for dc shunt motor? 1. Speed of a shunt motor is sufficiently constant 2. For the same current input, its starting torque is not high as that of series motor 3. The motor can be directly coupled to a load such as fan whose torque increases with speed Select the correct answer using the code given below.
The speed of a motor falls from 1200 rpm at no-load to 1050 rpm at rated load. The speed regulation of the motor is ____________
If the no load speed of DC motor is 1300 rpm and full load speed is 1100 rpm, then its voltage regulation is ____________
A 3-phasle, 6-pole, 50 Hz induction motor has a full load speed of 960 rpm with its slip rings short circuited. The motor drives the constant load. If the speed is reduced to 800 rpm, then ohmic losses will _________
A 3-phase, 6-pole, 50 Hz induction motor has a full load speed of 960 rpm with its slip rings short circuited. The motor drives the constant load. If the speed is reduced to 800 rpm, then ohmic losses will be?