Bissoy.com
Doctors Medicines MCQs Q&A

For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils has simplex winding. The number of current paths is?

For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils has simplex winding. The number of current paths is? Correct Answer 2

The number of parallel path for a wave wound machine is equal to two.

Related Questions

For a four pole, 16 slot armature with two coil-side/slot having lap connected progressive winding has single turn coils. The same machine is then wave wound, the emf induced in the lap wound dc machine to that of wave wound will be ________
For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils. The commutator pitch for the machine should be ________
Five theatres PVR, DT, Chanakya, Regal and Maratha Mandir screen two out of ten films based on Romance, Thriller, Horror, Adventure, Children, Drama, Documentary, History, Religion and Cartoon. Each theatre exhibits only two films and allots two different slots for them, wherein slot I is before slot II. Chanakya screens a Horror film in the first slot, while Maratha Mandir exhibits a Historical film in the second slot. DT exhibits a thriller film in the second slot and Regal exhibits a documentary film. Drama must be exhibited only in the second slot. The children’s film and the Cartoon film are exhibited in the same theatre while the religious film is not in the first slot. If Chanakya screens a Religious film in its second slot, then which of the films can be screened by theatre Regal?
For a four pole, 16 slot armature with two coil-side/slot having lap connected progressive winding has single turn coils. Then number of commutator segment is?
What is the value of Yf for a lap winding with a 4-pole, 12-slot armature with two coil sides/slot? (Assume single-turns coils – progressive winding)
What is the spacing between the brushes for a wave winding when a machine is 6-pole DC armature with 16 slots having 2-coil sides per slot and single-turn coils.
Calculate the number of conductors on each pole piece required in a compensating winding for a 6-pole lap-wound dc armature containing 286 conductors. The compensating winding carries full armature current. Assume ratio of pole arc/ pole pitch = 0.7.
In an alternator, the armature winding is kept stationary while the field winding is kept rotating for the following reasons: 1. Armature handles very large current and high voltage 2. Armature fabrication, involving deep slots to accommodate large coils, is easy if armature is kept stationary 3. It is easier to cool the stator than the rotor Which of the above reasons are correct?
What is the value of Yb for a lap winding with a 4-pole, 12-slot armature with two coil sides/slot. Assume single-turns coils.
For a wave winding when a machine is 6-pole DC armature with 16 slots having 2-coil sides per slot and single-turn coil, Yf value is ____