Bissoy.com
Doctors Medicines MCQs Q&A

For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils. The commutator pitch for the machine should be ________

For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils. The commutator pitch for the machine should be ________ Correct Answer 1

Commutator pitch for the wave connected progressive winding should be 1.

Related Questions

For a four pole, 16 slot armature with two coil-side/slot having lap connected progressive winding has single turn coils. The same machine is then wave wound, the emf induced in the lap wound dc machine to that of wave wound will be ________
For a four pole, 16 slot armature with two coil-side/slot having wave connected progressive winding has single turn coils has simplex winding. The number of current paths is?
For a four pole, 16 slot armature with two coil-side/slot having lap connected progressive winding has single turn coils. Then number of commutator segment is?
Five theatres PVR, DT, Chanakya, Regal and Maratha Mandir screen two out of ten films based on Romance, Thriller, Horror, Adventure, Children, Drama, Documentary, History, Religion and Cartoon. Each theatre exhibits only two films and allots two different slots for them, wherein slot I is before slot II. Chanakya screens a Horror film in the first slot, while Maratha Mandir exhibits a Historical film in the second slot. DT exhibits a thriller film in the second slot and Regal exhibits a documentary film. Drama must be exhibited only in the second slot. The children’s film and the Cartoon film are exhibited in the same theatre while the religious film is not in the first slot. If Chanakya screens a Religious film in its second slot, then which of the films can be screened by theatre Regal?
What is the value of Yf for a lap winding with a 4-pole, 12-slot armature with two coil sides/slot? (Assume single-turns coils – progressive winding)
What is the spacing between the brushes for a wave winding when a machine is 6-pole DC armature with 16 slots having 2-coil sides per slot and single-turn coils.
Calculate the number of conductors on each pole piece required in a compensating winding for a 6-pole lap-wound dc armature containing 286 conductors. The compensating winding carries full armature current. Assume ratio of pole arc/ pole pitch = 0.7.
Distributed winding is a type of winding in electrical machines where all the winding turns are arranged in a number of full pitches or fractional pitches. These coils are then placed in phase form or the commutator winding in slots spread around the periphery of the air gap. This type of winding used in
What is the value of Yf for a lap winding with a 4-pole, 12 commutator segments, with two coil sides/slot.? (Assume single-turns coils -retrogressive winding).
What is the value of Yb for a lap winding with a 4-pole, 12-slot armature with two coil sides/slot. Assume single-turns coils.