Bissoy.com
Doctors Medicines MCQs Q&A

A single-phase full bridge diode rectifier delivers power to a constant load current of 10 A. The average and rms values of the source currents will be respectively.

A single-phase full bridge diode rectifier delivers power to a constant load current of 10 A. The average and rms values of the source currents will be respectively. Correct Answer 10 A, 10 A

As the load current is continuous, Iavg = Irms = 10 A.

Related Questions

When we compare the half bridge converter and full bridge converter 1. The maximum collector current of a full bridge is only double that of the half bridge 2. Full bridge uses 4-power switches instead of 2, as in the double bridge. 3. Output power of a full bridge is twice that of a half bridge with the same input voltage and current. When of the above statements are correct?
For a single phase, full bridge, diode rectifier excited from a 230 V, 50 Hz source. With R = 10 Ω & the inductance(L) large enough to maintain continues conduction, the average and rms values of diode currents will be
For a Zener diode shunt regulator, the source current is IS, the Zener diode current is IZ and the load current is IL. The source voltage is VS, Zener voltage is VZ and load voltage is VL. The load resistance is RL. What is the correct option for the safe operation of the diode?
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from AC source to the DC load. Consider E = 120 V, R = 0.4 Ω.
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from the DC load to the AC source. Consider E = 120 V, R = 0.4 Ω, L = 2 Henry.
A step-down delta-star transformer, with per-phase turns ratio of 5 is fed from a 3-phase 1100 V source. The secondary of this transformer is connected through a 3-pulse type rectifier, which is feeding an R load. The power delivered to the load is 6839.3 Watts. The maximum value of the load current is √2 x 22 A. Fin, the rms value of output voltage Vo (rms)
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
For an SCR the average & rms values of current are I/4 & I/2 respectively. Calculate the average on-state current rating (ITAV). Take maximum RMS on-state current = 35 A.
A three-winding transformer is connected to an AC source with 50 V rms as shown in the following figure. Voltages induced in the secondary windings are 2 V rms and 8 V rms. The output rms voltage V0 is,
A single phase full bridge inverter is fed from a dc source such that the fundamental component of output voltage = 230 V. Find the rms value of SCR and diode current respectively, for a R load of 2 Ω.